Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KORG SV1. We hope that this KORG SV1 user guide will be useful to you.
Lastmanuals help download the user guide KORG SV1.
Detailed instructions for use are in the User's Guide.
[. . . ] Be sure to follow the steps in order, and make sure that the parts are assembled in the correct orientation and position. Do not apply weight to the edge of the piano before tightening the screws, otherwise the piano may fall down. Open the packing carton and take out the contents. [. . . ] The last position does not correspond to a hole, but to a half-moon symbol (e’). Once the movable part of the leg is correctly positioned, tighten the screw (d) to lock it. the hole will be automatically centered. Note: The first position (the lower hole) corresponds to the standard height of a grand piano’s keyboard. The fourth position (the half-moon symbol) is used to play while standing up. Please repeat the same procedure for all the other legs, being careful to position them all at the same height. Lift the bracket (a), and insert it into the corresponding hole (e”) in the leg (c”). Repeat the same procedure for all four legs. Warning: Be careful not to pinch your fingers between the leg and the bracket!Turn the stand (B) upside down, so that the feet are laying on the floor. Place the concave side of the bracket (f) toward you – the KORG logo (g) must be visible on your side. Adjust the height of the feet (h), by turning them by hand and leveling the stand on
each side, even if it is not completely even. We suggest you prevent the nut (i) from turning with the help of the supplied 11/16” wrench (j). After adjusting each of the feet, make sure that the nut (i) touches the leg’s border. Using two people, lift the piano (A), and attach it to the ST-SV1 stand (B). While one
person prevents the piano from falling down, the other should make the small rubber foot (k) under the piano line-up to the concave side of the bracket (f), and the screw (l) under the piano with the space left on the side of the convex side of the bracket (m). [. . . ] After transportation, refer to these instructions and re-assemble the piano and stand. After assembly, the various screws and bolts of the stand may
loosen as time goes by, causing the stand to wobble. If you need to packup the piano, reverse the assembly order by which the piano was attached to the stand and the stand was assembled. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KORG SV1
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KORG SV1 will begin.
KORG SV1 ANNEXE 3 (9229 ko)
