User manual KORG T2EX BROCHURE

[. . . ] Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] The screen will indicate "Working. . . ", and deletion will begin. When it ends, the screen will indicate "Completed. " 6. Press the exit button to return to the project/file edit screen. 20 Viewing details about the project/file Here's how you can view detailed information about a project/file. You can view the audio format, song length, artist, title, date and time, and file size. Select and confirm the project/file whose details you want to view. Refer to "Selecting a project/file to edit" on page 17. The project/file edit screen will appear, with the name of the selected file in the top line. Use the dial to select "Information" and press the enter button to confirm. Details about the project/file will be displayed. 4. When you've finished viewing the details, press the exit button to return to the project/file edit screen. 9. Using marks within a project If you've made an extended recording, such as a live performance or a practice session, you can quickly navigate between songs or to a desired location by using markers to move while you listen to the program or by fast-forwarding or rewinding according to the counter time. You can edit the marks even of a project whose Protect setting is on, but they will revert to their unedited state when you select a different project or turn off the power. In the mark list (Mark List) screen, use the dial to select the mark that you want to edit, and press the enter button to confirm. The mark edit select (Mark Edit) screen will appear. To return to the mark list (Mark List) screen, press the exit button. 22 2. Use the dial to select the item that you want to edit, and press the enter button to confirm. Changing the time locations of the marks You can register marks in any position of the WAV, DFF or WSD project, but for the DSF project, only the 11. 6 ms (Fs=2. 8 MHz) or larger size mark can be registered by a unit of 5. 8 ms (Fs=5. 6 MHz). When the time locations are changed, each location is automatically set to the nearest position within its specified region. When you use the dial to select the time, the time location of the mark will be changed, and press the enter button to confirm. The selection icon will change from " " to " ". The highlighted place will change each time you press the enter button. By pressing the enter button when the last place is highlighted, you can exit from changing the time location; to continue changing the time location, simply press the enter button again. To change the digits of the highlighted place, turn the dial to specify the value and press the enter button to confirm it. [. . . ] Make sure that the coaxial digital cable is not faulty. · Lock was lost when synchronized to S/P DIF. Make sure that the external device is correctly con- Failed to write System File. · The system update has failed. It is possible that the T2EX has malfunctioned. nected to the T2EX. Make sure that the coaxial digital cable is not faulty. [. . . ]