User manual KORG T3EX BROCHURE

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Press the P-dial (or the menu button) to complete the backlight setting. The selection icon will change from " " to " ". Alternatively, you can press the P-dial to complete the setting. 26 Auto shutdown setting If no operations have been performed for the length of time you specify here, the shutdown screen will appear automatically, and the power will turn off several seconds after that. This will prevent the battery from running down in the event you forget to turn off the power. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "SYSTEM. " The system setting (SYSTEM) screen will appear. Use the P-dial to select and confirm "AutoShutDown. " The selection icon will change from " " to " ", and the setting will be highlighted. Turn the P-dial to specify the time until when the power will turn off. If this is set "OFF" the power will stay on; Auto shutdown will not occur. Push Push Push 4. Press the P-dial (or the menu button) to complete the Auto shutdown setting. The selection icon will change from " " to " ". LED setting Normally, the recording LED will light while recording, but you can reduce the power consumption even further by turning this LED function off. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "SYSTEM. " The system setting (SYSTEM) screen will appear. Use the P-dial to select and confirm the project whose Protect setting you want to change. (See "Selecting and playing back a project/file, " p. 18) If you want to protect the currently selected project, simply press the P-dial twice to confirm. The project/file edit screen will appear, with the name of the project you just selected shown at the top. Turn the P-dial to move the selection icon to "Protect. " Push 5. Each time you press the P-dial, the setting will alternate between protecting ( ) and un-protecting ( ) the project. When you've finished making the setting, press the menu button to return to the library select (LIBRARY) screen. Deleting a project/file Here's how to delete a file. Once you've deleted a file, it cannot be recovered, so use this operation with care. You can't delete a project that's protected. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "LIBRARY. " The library select (LIBRARY) screen will appear. Use the P-dial to select and confirm the project/file that you want to delete. (See "Selecting and playing back a project/file, " p. 18 ) To delete the currently selected project/file, simply press the P-dial twice. [. . . ] Delete unneeded projects/files. Failed to write System File. · The system update has failed. It is possible that the T3EX has malfunctioned. Please contact customer service. Memory Full. · You attempted to register more than 100 marks. Delete unneeded marks before registering other marks. Not supported file. · This file format is not supported. [. . . ]