User manual KORG TR-RACK

[. . . ] Turn the PROGRAM/DIAL/DEPTH dial to scroll through the effect programs, from 00 to 99. Notice, with no small degree of satisfaction, that this little beast sounds just as fearsome as its big brothers! Adjusting the Effect Depth Is your flanger too feisty?By default, all the mini-KP's effects are all cranked up to 99. . . [. . . ] When you turn the mini-KP on, it will briefly display the depth of the current effect ("d99" by default). . . Hold down MEMORY A and then press the TAP/BPM button. You'll see "d99" (or whatever it's currently set to). Turn the PROGRAM/BPM/DEPTH dial to change the setting. Push the TAP/BPM button to return to normal play mode. (If you wait about fifteen seconds, it will return to normal play mode automatically) Note: When you save a program to the MEMORY A/B buttons, the current depth setting will be saved along as well. Note: The effect depth setting will stay the way you set it until you either turn the mini-KP off, or use the MEMORY A/B buttons to recall a program with a different effect depth setting. 2 Mini-KP EasyStart Using the Hold Function The Hold function allows you to take your finger off the pad, and still have the effect going as if your finger was still there. Press the HOLD button to turn the Hold function on. I know, that's confusing, but bear with us. The little red light on the bottom-left tells you its working. If you can't find it, you've got bigger problems to worry about. On the LED screen, you'll see the tempo. Tap the TAP/BPM button along with the beat of the incoming audio and it will detect the BPM automatically!Turn the PROGRAM/BPM/DEPTH dial to fine-tune the BPM. Storing Your Favorite Effect Programs You can store your two favorite effect programs on the MEMORY A/B buttons on the front panel, so you can get to them quickly. To save a program you like, press either MEMORY A or MEMORY B, and then hold down the HOLD button. To recall the effect, just press MEMORY A or MEMORY B again. This step is only here for consistency. 3 Mini-KP EasyStart Note: In case you somehow missed it: when you save a program on the MEMORY A/B buttons, the effect depth, Hold, and FX Release are ALL ALSO SAVED. Resetting the mini-KP to Factory Defaults To reset the mini-KP to its factory settings, hold down the MEMORY A and TAP/BPM buttons while you turn it on. You'll see "Pld" on the LCD display. Release the buttons, and the mini-KP will be restored. Effect Programs to Try Program # Effect Type Description Program 01 Program 16 Program 10 Highpass Filter Jet (Manual Flanger) Morphing Filter The perfect squelchy DJ filter! [. . . ] Release the buttons, and the mini-KP will be restored. Effect Programs to Try Program # Effect Type Description Program 01 Program 16 Program 10 Highpass Filter Jet (Manual Flanger) Morphing Filter The perfect squelchy DJ filter!This is manual control over an oftenautomatic flanger. Not only can you control cutoff and resonance with the Y axis. . . [. . . ]