User manual KORG TRITONEXTREME

[. . . ] 2. To select Programs, press the [PROG] key. To select Combinations, press the [COMBI] key. Then press a [BANK] key to select one of the sound banks, followed by using the DIAL, [INC]/[DEC] keys, or numeric keypad to select sounds from within a bank. Programs are located in BANKS A-D (and G for General MIDI). [. . . ] One program uses one arpeggio pattern - Combi or Sequence modes use up to two arpeggio patterns at once. 1. Programs have an arpeggio pattern assigned to them even if the Arpeggiator [ON/OFF] key does not “wake up” in the ON position. Example: Select Program A35 Arco Strings Press the Arpeggiator [ON/OFF] key so it is on (lit) Work with the realtime controls: TEMPO, GATE (overall step length), and VELOCITY (loudness of arpeggiated notes) Press the Arpeggio tab at the bottom of the screen Work with the Octave radio button, change the clock Reso (=Resolution), check the Latch box. To view the Arpeggiator grid, press the [GLOBAL] key, press [MENU], press P. 6 User Arpeggio The procedure is covered in the Owners Manual Basic Guide, pp. Combinations may have up tp two arpeggio patterns assigned to them even if the Arpeggiator [ON/OFF] key does not “wake up” in the On position Example:Select COMBI A12, Bell Amis Note that Realtime controls affect both arps globally Press the Arpegg. B tab at the bottom of the screen to work with individual parameters Press the popup at the Pat: (Pattern) field and try substituting a different arp pattern. 2. Working with the TAP TEMPO Function: 1. Tap Tempo in Program Mode: Select Program A066, Wild Arp Hold down some notes on the keyboard, and press the [ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly. Tap Tempo in Combi Mode: Select Combi A102, The 16th Strummert Hold down some notes on the keyboard, and press the [ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly . Tap Tempo in Sequence Mode: After creating a New Song and pressing the [REC/WRITE] key, press the [ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly . Tap Tempo of tempo-based Effects: Select Program B082, Space Pod for 2 Note that the [ARP ON/OFF] switch is off Press the [ENTER] key 3 or 4 times at the desired tempo: the program’s LFO and the BPM of Insert Effect 2 (algorithm 50: St. BPM Delay) both update to the tapped tempo. Sequence mode: Creating songs quickly with Song Templates 1. Alternate quick song method featuring One-Touch Recording: 1. Choose any Program or a Combi Tap the [ENTER] key at least 3x to enter a desired tempo. Triton Hold down [ENTER] and press [REC/WRITE] Press [OK] to answer “Setup to Record: Are you sure?” jumps to Record mode, with the [REC/WRITE] key already armed. 5 TRITONEXTREMEEXTREME EasyStart 3. Press [START/STOP] to begin recording Press [START/STOP] again to stop recording. Alternate song method for copying Combis with Arps: 1. Choose any Combi with the [ARP ON/OFF] switch on (lit). Create a new song Press the upper right corner drop-down menu and press “Copy from Combi” with [F8] Check both boxes “with Effects” and ”Auto Adjust Arp for Multi REC” Press [OK]]. Press [START/STOP] to begin recording Press [START/STOP] again to stop recording. Press [MENU] Press [P5] [TrackEdit] Select a Track to edit; select the first four measures as a region to edit (from M:001 to End of M:004) Press the upper right corner drop-down menu and select Quantize Set Resolution to the 16th note icon Press the “Swing:” field, type or dial in a percentage, and press[OK]. Sampling mode TRITONEXTREMEEXTREME samples at 48kHz, 16-bit, in mono or stereo. With the provided 16 MB, the TRITONEXTREMEEXTREME is capable of recording samples of 174 seconds @ mono, or 87 seconds @ stereo. Fully expanded with SIMM modules to 64 MB, it allows about 11 ½ mono minutes or 5. 8 stereo minutes of sampling! [. . . ] Press the [MENU] key, then press P0: Recording “arm” the sampler 14. Press [Create] to make a new index in the multisample Press [F2] (“Rec”) Press the [REC/WRITE] key to “arm” the sampler Speak into the mic and adjust the recording level as needed (see step 7 above) Press the [START/STOP] key, speak to sample Press [START/STOP] again to stop sampling. The new sample will playback on key E2 – the next available index. More new features of O. S. 2. 5! Time Slice Samples to Pattern/RPPR: This makes it easier to use multiple samples that were originally at different tempos. [. . . ]