User manual KORG Z1

[. . . ] . 7 Removing (unloading) PCM expansion option multisamples. 8 EX-USB-PCM Auto Load function . . 9 Listening to the demo songs of PCM expansion option . . 11 Editing MIDI system exclusive data . . 11 Additional functions for chasing the location. [. . . ] If the size of the EX-USB-PCM exceeds the free space in RAM memory, the box will be grayed-out and cannot be selected. This completes the settings. 2 Auto Using the Auto Load function 1. Connect the USB device containing the KEP file to the USB A connector of the Z1 XPANDED. The Z1 XPANDED's display will show a red progress bar while the system data is being loaded. When the system data has finished loading, a blue progress bar will be shown while the KEP file is auto-loaded. During this process, the title of the KEP file that is loading will be shown at the bottom of the display. Note: Never disconnect the USB device containing the KEP file while the data is being loaded. Note: Once the Auto Load has finished, there is no need for the USB device to be connected unless you will need to load other data. 9 Listening to the demo songs of PCM expansion option The Z1 XPANDED contains demo songs that use programs from the newly added PCM expansion options. EX-USB-PCM03 EX-USB-PCM01, 02 S000, S001, S002 S008. . . S015 These demo songs will not play correctly unless the multisamples of the corresponding PCM expansion options are loaded. You must load the multisamples before playing the demo songs. Quick start 1. In Media mode, load the PCM expansion option multisamples. Note: There will be a brief time interval before the arrow appears and the control responds. Use the Touch Drag function to make approximate settings for the knobs and sliders. Note: It is convenient to use a commercially available stylus pen for operating small components in the display. Knobs When you touch a knob, a left/right arrow will appear. In this state, drag left/right to use the knob and change its value. If the knob is a panner, dragging to the 12 o'clock position will set the knob to C064, and dragging to the 6 o'clock position will set it to RANDOM. Sliders When you touch a slider, an up/down arrow will appear. In this state, drag up/down to use the slider and change its value. Pages and parameters where this is available Examples in Combination/Sequencer - P0: Mixer - Pan knobs, Volume sliders - P0: KARMA RTC - sliders - P0: Sampling - Recording Level sliders - P0: Control Surface - various sliders - P2: Trim/EQ - various knobs - P7: IFX Setup - Pan knobs - P8: MFX/TFX - various knobs, etc. All knobs and sliders in each mode are also supported. Track View and Piano Roll The new Track View page and Piano Roll dialog box in Sequencer mode allow you to specify a region of measures or move/erase notes by operations such as dragging. Refer to page 11 "Additional sequencer functions" in this guide. 12 Expansions to KARMA function KARMA 2. 2 KARMA 2. 2 is a major new release, including support for User GEs, new control over Scene change and Module quantization, the ability to switch KARMA GEs seamlessly while KARMA is operating, and other improvements. For more information, see "7-1-8: Trigger" on page 89 of the Parameter Guide, and "7-2-2: Perf Real-Time Parameters" on page 92 of the Parameter Guide. User GEs and GE Creation/Editing The Z1 XPANDED now supports User GEs, with 8 banks of 128 User GEs each (for a total of 1024). You can also save and load . KGE files, which contain KARMA GEs and Template Data. GEs may be created, edited, and uploaded to the Z1 XPANDED using the optional KARMA Z1 Software (PC/Mac), available separately from Karma-Lab (www. karma-lab. com). Quantized/Delayed Scene Changes Scene changes may now be quantized to various metric divisions, from a 16th-note triplet up to 4 bars. [. . . ] Per Program in Program Mode, per 3-band Track EQ Timbre in Combination mode (16 total), and per Track in Sequencer mode (16 total). 170 types (Usable for insert, master, or total effects. However, double-size Effects types effects cannot be used as the total effect. ) Modulation Dynamic Modulation, two common LFOs Effects Control Bus Stereo side-chaining for limiter, gates, vocoders, etc. Effects Presets Up to 32 per Effect/ 700 Preset AUX bus Two internal buses for sampling and routing audio to the EXB-RADIAS X­Y MODE TouchView display can be used as an X­Y controller. [. . . ]