User manual KREISEN DVR 530C

[. . . ] Precautions IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence fo importantoperating and maintenance(servicing) instructions in the literature accompanying the appliance. These labels can be found on the unit's rear panel. Ces tiquelttes se trousent sur le fond de Pappareil. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] This operation works only with discs on which multiple audio languages are recorded. If the loaded disc supports multiple audio languages, you can select the audio language. Repeating a Title, Chapter Use this button to repeat the chapter/title for DVD or track/disc for VCD and Audio CD. 1 2 Press REPEAT button during playback. The repeat information is displayed on the top of screen. Each time you press REPEAT button, the repeat mode is changed as follows. 1 2 Press AUDIO button during playback. The audio information is displayed on the top of screen. Each time you press AUDIO button, the audio language is changed. NOTE Language function is a disc dependent. In this case, the language should be selected via the disc menu. NOTE With some DVD discs, there may be times when repeat playback is not possible. 20 Advanced Playback Advanced Playback A-B Repeat (DVD only) Use this function to repeat the play of a selected segment. This is very useful for studying foreign languages because it repeats the selected segment until canceled. ZOOM Screen Enlarges DVD/VCD screen image up to 2 times. 1 2 Press ZOOM button during playback. Each time you press ZOOM button, the zoom mode will be changed : 1 2 3 Press A-B button at the point of where repeat play is to start. The starting point of your selected segment is set up. Press A-B button again at the point of where repeat play is to end. To cancel the A-B repeating, press A-B button once more. The playing state changes to normal. NOTE We recommend you set up the desired segment within a minimum 5 seconds for smooth repeat play. 3 4 You can move the image by using button. , , , To cancel the zoom mode, press ZOOM button repeatedly until the player resume to normal playback. Advanced Playback 21 Advanced Playback Switching the Camera Angle (DVD only) When a DVD contains recorded multiple angles of a scene, you can select the Angle function. Direct Search (DVD/VCD) You can select a specific chapter or title to play. Also you can move to a specific time in a track or title. 1 2 Press ANGLE button during playing. Available angles of the current scene will be displayed on the top of screen and the angle is changed. Each time you press ANGLE button, the angle is changed. 1 2 Press GOTO button during playback. The playback information appears on TV screen. Each time you press GOTO button, the search mode is changed as follows. NOTE You can only change the angle for DVDs that provide multiple angles of scenes. The angle function will not work on DVD video discs that do not contain recorded multiple angles. The number of angles varies from disc to disc. 3 Title Search Select "TITLE" by pressing GOTO button. Enter the title number by using numeric 0 to 9 button. It starts to play back from the specified title. [. . . ] Picture disturbance during playback or dark. 40 Additional Information Additional Information Problem The remote control doesn't seem to work. Solution The remote control is too far from the player, or the angle with the remote sensor is too wide. Use the remote within its operating range. Some DVD discs do not output digital audio. Switch your amplifier to the player's analog outputs. [. . . ]