User manual KRESS 108 LIOS

[. . . ] Do not use power tools in damp or wet locations. Do not use power tools in presence of flammable liquids or gasses. 4 Guard against electric shock Avoid body contact with earthed surfaces (e. g. pipes, radiators, ranges, refrigerators). [. . . ] 18 Avoid unintentional starting Do not carry a plugged-in tool with a finger on the switch. Be sure the switch is off when plugging in. 19 Outdoor use extension cords When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 20 Stay alert Watch what you are doing, use common sense and do not operate tool when you are tired. 21 Check damaged parts Before you use the tool, always carefully check the guarding and other parts to determine that they will operate properly and perform their intended functions. Check for alignment of moving parts, binding of moving parts and breakage of parts. Check for proper mounting of all parts and any other conditions that may affect their operation. A guard, switch or other part that is damaged or defective should be properly repaired or replaced by a qualified person. Do not use tool, if switch does not turn it on and off. Use the tool and its accessories in accordance with these safety instructions and in the manner intended for the particular tool, taking into account the working conditions and the work to be performed. Use of the tool for operations, different from those normally expected to be performed by the particular tool, could result in a hazardous situation. Veillez utiliser l'outil et ses accessoires conformment aux instructions de scurit Veuillez galement tenir compte des possibilits de l'outil en prtant attention aux conditions de travail et la tche excuter. Utilisez l'outil pour des tches autres que celles prvues par l'outil, risquerait d'tre dangereux. 23 Faites rparr votre outil par un technicien qualifi Cet outil est conforme aux rgles de scurit en vigueur. Toutes les rparations doivent tre effectues par des professionnels qualifis avec des pices dtaches originales; faute de quoi l'utilisation de l'outil peut reprsenter un danger pour l'utilisateur. 34 GB CE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 50 144, EN 55 014, in accordance with the regulations 73/23/EEC, 89/336/EEC, 98/37/EEC. NOISE/VIBRATION Measured in accordance with EN 50 144 the sound pressure level of this tool is 99 dB(A), the sound power level 112 dB(A) and the vibration 14. 7 m/s2 (hand-arm method). CE DCLARATION DE CONFORMIT Nous dclarons sous notre propre responsabilit que ce produit est en conformit avec les normes ou documents normaliss suivants: EN 50 144, EN 55 014, conforme aux rglementations 73/23/EEC, 89/336/EEC, 98/37/EEC. BRUIT/VIBRATION Mesur selon EN 50 144 le niveau de la pression sonore de cet outil est 99 dB(A), le niveau de la puissance sonore 112 dB(A) et la vibration 14, 7 m/s2 (mthode main-bras). CE KONFORMITTSERKLRUNG Wir erklren in alleiniger Verantwortung, da dieses Produkt mit den folgenden Normen oder normativen Dokumenten bereinstimmt: EN 50 144, EN 55 014, gem den Bestimmungen der Richtlinien 73/23/EWG, 89/336/EWG, 98/37/EWG. GERUSCH/VIBRATION Gemessen gem EN 50 144 betrgt der Schalldruckpegel dieses Gertes 99 dB(A), der Schalleistungspegel 112 dB(A) und die Vibration 14, 7 m/s2 (Hand-Arm Methode). CE CONFORMITEITSVERKLARING Wij verklaren, dat dit product voldoet aan de volgende normen of normatieve documenten: EN 50 144, EN 55 014, overeenkomstig de bepalingen van de richtlijnen 73/23/EEG, 89/336/EEG, 98/37/EEG. GELUID/VIBRATIE Gemeten volgens EN 50 144 bedraagt het geluidsdrukniveau van deze machine 99 dB(A), het geluidsvermogenniveau 112 dB(A) en de vibratie 14, 7 m/s2 (hand-arm methode). [. . . ] / GRLT/T<TREfiIM llen EN 50 144 gre ses basinci bu makinanin seviyesi 99 dB(A), al>flma s>ras>ndaki grlt 112 dB(A) ve titreflim 14, 7 m/s2 (el-kol metodu). OWIADCZENIE ZGODNOCI CE Niniejszym owiadczamy ponoszc osobist odpowiedzialno, e produkt wykonany jest zgodnie z nastpujcymi normami i dokumentami normalizujcymi: EN 50 144, EN 55 014, z godnie z wytycznymi 73/23/EWG, 89/336/EWG, 98/37/EWG. HAASU/WIBRACJE Pomiarw dokonano zgodnie z norm EN 50 144 cinienie akustyczne narzdzia wynosi 99 dB(A), poziom mocy akustycznej 112 dB(A), za wibracje 14, 7 m/s2 (metoda do-rka). , : EN 50 144, EN 55 014, 73/23/EEC, 89/336/EEC, 98/37/EEC. [. . . ]