User manual KRESS 144 AFB 2.6

[. . . ] General safety instructions for power tools wARNING!Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. [. . . ] They preserve the battery and the battery charger from overheating. Do not charge the batteries of other manufacturers. the device is only suitable for the charging of KRESS batteries. There is otherwise a risk of fire and explosion. Check the electrical device, cable and plug each time before using. Do not use the electrical device when defects are detected. Do not open the electrical device yourself and have it repaired only by qualified personnel using original spare parts. Ensure that the connection between the charger and the battery is correctly positioned and is not impeded by foreign bodies. There is a risk of fire and explosion through short circuits caused by metal objects. Ensure that the battery charging compartment does not have any foreign objects and protect The storage location must be dry and frost-free. There is a risk of fire and explosion in the case of a short-circuit. If the drill becomes wedged unexpectedly, the power tool will suddenly jerk. if the tool insert becomes caught or is jammed , the drive to the drill spindle is interrupted. Remove the load from the machine immediately by retracting the drill bit Switch off the power tool and loosen the drilling tool if the power tool has jammed. If the machine is switched on while the drilling tool is jammed, high reaction moments can occur. ASL Auto-Spindle Lock (Option) If the On/Off switch VI is not pressed, the drill spindle and thus the tool holding fixture are locked. This enables screws to be driven in even when the battery is flat and allows you to use the power tool as a screwdriver. Your battery charger is double-insulated in accordance with EN 60335. For this reason an earth wire is not required. The device is suppressed against radio and TV broadcasts, in accordance with EN 55014-1 and is immune to disturbances in accordance with EN 55014-2. When driving in screws, do not release the On/Off switch VI until the screw has been driven in flush with the surface material. This prevents the head of the screw penetrating into the material. [. . . ] Spare parts / exploded view Exploded views and spare parts lists are available on our home-page http://spareparts. Before disposing of batteries, cover the battery contacts with the battery cap. Return used or faulty battery packs via your specialist dealer or the KRESS Customer Service department or dispose of them in the prescribed manner in public waste disposal facilities. This ensures that the battery packs are recycled as prescribed. [. . . ]