User manual KRESS 300 EXE

[. . . ] The machine must not be used to grind material that contains asbestos. Outside power sockets must be protected with residual-current-operated circuit-breakers (r. Do not drill holes into the housing to label the machine. Switch with fixing key for continuous operation. [. . . ] The triangular grinder is equipped with a grinding disc with a large width across the corners, for which various self-adhesive abrasive papers with different grain sizes are available. The quick-release lock allows you to replace the grinding disc without additional tools and rotate the disc in 120° intervals. A flap attachment (optional) and a respective range of grinding paper sizes are available for grinding slatted doors and shutters. Press the grinding disc into the fixture and turn in the direction of the arrow until the lock snaps into place. To remove the grinding disc, press in the lock (3) and turn the grinding disc (4) in the opposite direction. this procedure also applies to the assembly and disassembly of the flap attachment (10). If the Velcro lining on the original grinding disc becomes worn or damaged during use, you may turn the grinding plate 120° twice to obtain proper adhesion for the Velcro paper. The Velcro lining on the grinding disc is a wearing part and is thus excluded from the conditions of the guarantee. Use only original KRESS grinding tools with selfadhesive Velcro!For heavy dirt accumulation clean grinding disc!We reserve the right to make changes in accordance with technical advancement. Sanding body-work damage Sanding old lacquer Grinding lacquered surfaces Grinding natural wood Rough-grinding glass fiber reinforced plastics Precision-grinding glass fiber reinforced plastics Derusting steel The vacuum connection piece (7) allows you to eliminate sanding dust using a commercial vacuum cleaner. This is particularly advantageous when working over a longer period of time. Dust and dirt is produced by every tool when working with wood. Proper maintenance is therefore imperative. Ensure that all openings, in particular those required to cool the motor, are always free of dust and dirt. All movable parts are sufficiently lubricated before leaving the factory. As with all service work, brush replacement is carried out quickly and easily by our service locations. They must be replaced by competent personnel without delay. Parcourir entièrement la notice d'utilisation avant de mettre la machine en service, suivre les consignes de sécurité de cette notice, de même que les consignes de sécurité générales relatives aux outils électriques dispensées dans la brochure fournie avec la notice. [. . . ] Parcourir entièrement la notice d'utilisation avant de mettre la machine en service, suivre les consignes de sécurité de cette notice, de même que les consignes de sécurité générales relatives aux outils électriques dispensées dans la brochure fournie avec la notice. This electrical tool has been designed with high precision and was approved after undergoing strict quality control checks in the factory. We are therefore able to guarantee free servicing of any production or material faults which arise in the 24 months after the date of sale to the purchaser. We reserve the right to repair defective parts or else replace them with new parts. [. . . ]