User manual KRESS 420 BME

[. . . ] Quick change chuck In the usual manner by twisting the locking sleeve as far as it will go. Always make sure that the chosen speed is correct for the purpose for which you are using the machine. high speeds are necessary for polishing and grinding. When drilling match speed with type of material and drill. [. . . ] Noise/vibration information Measured values correspond with EN 50144 Sound pressure level: 76+3 dB (A) Sound power level: 83+3 dB (A) Work place emission value: 73+3 dB (A) Operators require noise protection equipment. Environmental Protection Kress takes back worn-out machines for the purpose of resource-saving recycling. As a result of their modular construction, Kress machines can be very easily dismantled into their reusable materials. Give your worn-out Kress machine to your dealer or send it directly to Kress. Use The all-purpose power drill is for drilling and screwing in wood, metal and plastic. Safety instructions and prevention of accidents Before operating the machine, please read through the operating instructions completely, follow the Safety Instructions in this manual as well as the general Safety Instructions for Power Tools in the accompanying booklet. Do not work with materials which contain asbestos!Outside power sockets must be protected with residual-current-operated circuit-breakers (r. Do not drill holes into the housing to label the machine. Always lead cables away towards the back of the machine. Double Insulation Our equipment is designed in accordance with European regulations (EN standards) for the utmost safety of the user. Machines with double insulation always carry the international symbol. The machines are interference-suppressed in accordance with EN 55014. Initial operation Before the first operation check that the mains voltage corresponds to that given on the machine nameplate. trigger switch with button for continuous operation The machine is set in operation by pressing in the handle switch (1). The holding button (2) on the side of the switch can be pressed for continuous operation. To release the continuous operation merely depress the switch, which makes the holding button spring back automatically. Electronic speed control This machine is equipped with a half cycle electronic control circuit. [. . . ] The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). If the tool is defective, please complete the guarantee card and return the unit, guarantee card and a brief description of the problem to the responsible service location. The guarantee obligations assumed by us shall exclude any further claims on the part of the buyer, in particular the right to recission of a sale, reduction and the assertion of damage claims. However, the buyer shall have the right to either a reduction (in the purchase price) or the recission of the sale (cancellation of the sales agreement) should we fail to eliminate any defects within a reasonable period of time. [. . . ]