User manual KRESS 455 TBS

[. . . ] The dry wall screwdriver is universally usable for screw driving in dry construction (drywall, plasterboard) as well as pressboard or fibreboard on wood or metal with quick dry wall screws or for the setting of sheet metal and wood screws in interior construction. Before the first operation check that the mains voltage corresponds to that given on the machine nameplate. The holding button (7) on the side of the switch can be pressed for continuous operation. To release the continuous operation merely depress the switch, which makes the holding button spring back automatically. [. . . ] or even better ­ TORX screws and the corresponding bits. Optimal screwing is achieved when the screwing device is fixed securely in the screw head. Our service personnel will do this and all other servicing work fast and professionally. The adjustment of the screwing depth takes place with the adjustment ring (3). As the result of a innovative mains cable module (6), this is possible in a quick and easy manner. Press the latches (5) on both sides and pull the mains cable module out of the handle. insert a new mains cable in the handle and latch. Mains cables in various lengths are available as special accessories. Use the mains cable module provided only for Kress Electro-Tools. Do not attempt to operate other machines with the module. 3 Turning to the left: The screw is set less deep. To determine the screw depth, it is recommended to begin with a low depth setting and readjust to the final depth. Sound pressure level: 76 +3 dB (A) Sound power level: 83 +3 dB (A) Work place emission value: 73 +3 dB (A). For operation, noise protection measures are required. The bit can then be pulled from the bit holder and a new bit inserted. The screw can be placed on the still standing bit while the machine is running. The clutch engages only after applying pressure while screwing. When the depth stop comes to rest on the surface, the clutch is disengaged. Kress takes back worn-out machines for the purpose of resource-saving recycling. As a result of their modular construction, Kress machines can be very easily dismantled into their reusable materials. [. . . ] The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). If the tool is defective, please complete the guarantee card and return the unit, guarantee card and a brief description of the problem to the responsible service location. The guarantee obligations assumed by us shall exclude any further claims on the part of the buyer, in particular the right to recission of a sale, reduction and the assertion of damage claims. However, the buyer shall have the right to either a reduction (in the purchase price) or the recission of the sale (cancellation of the sales agreement) should we fail to eliminate any defects within a reasonable period of time. [. . . ]