Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KRESS PK 450 HM. We hope that this KRESS PK 450 HM user guide will be useful to you.
Lastmanuals help download the user guide KRESS PK 450 HM.
Detailed instructions for use are in the User's Guide.
[. . . ] This pneumatic drill hammer is not suited for chiselling work (also not with pointed chisels). Safety Instructions and Accident Prevention Before putting the machine into operation, read through these operating instructions completely and observe the safety instructions. â· If the mains cable is damaged while working, pull the mains plug immediately. â· Never work with a damaged mains cable. [. . . ] Speed control With the On/Off switch 6, two speed steps can be selected. If the rotational direction switch 8 is set between the positions "R" and "L", the machine cannot be switched on. Before any work on the machine itself, pull the mains plug!Insert the tool while turning into the tool holder until it latches. Take care that the dust protection cap 2 is not damaged. Drill Chuck (Accessory) For drilling work in metal, wood and plastic with drills that have normal shafts, a drill chuck (13 mm max. All common drill chucks with 1/2" x 20 UNF internal threads (13 mm max. For hole starting, press the On/Off switch 6 lightly (hole starting step). Take hold of the rotational direction switch 8 on both sides. Before any work on the machine itself, pull the mains plug! clean the threads of the drill chuck (accessory) and the adapter 9 (accessory). Screw the drill chuck onto the adapter and tighten firmly (approx. Clamp an Allen key in the drill chuck and use it to tighten the chuck. For hammer drilling, work only with protective glasses and hearing protection. The performance is not increased in this manner. â· Check before putting into operation if the shift knob 4 is latched in the position. After the tile is drilled through, switch to impact drilling. Do not drill into hidden electrical lines or gas and water pipes. Check the area to be worked with a metal detector, for example, before starting. For metal, use only flawless, sharpened drills; for stone and concrete, only masonry drills with hard metal inserts. [. . . ] Remove the load from the machine immediately by pulling back the drilling tool. Always hold the machine tightly with both hands and assume a secure stance. This electro-tool was manufactured with high precision and subjected to rigorous factory quality controls. We guarantee for material and workmanship within 24 months from date of sale. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS PK 450 HM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS PK 450 HM will begin.
