Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KRESS PSE 75 EDITION. We hope that this KRESS PSE 75 EDITION user guide will be useful to you.
Lastmanuals help download the user guide KRESS PSE 75 EDITION.
Detailed instructions for use are in the User's Guide.
[. . . ] Wood Sheet metal Weight Protection class Sound pressure level: 83, 5 dB (A) Sound power level: 96, 5 dB (A) Workplace related emission value: 86, 5 dB (A). For operation, noise protection measures are required. Accessories illustrated or described are not always included as standard delivery items. When hammer drilling, use exclusively drills with hard metal inserts and SDS-Plus shafts. [. . . ] INSERTING TOOLS Before any work on the machine itself, pull the mains plug!Insert the tool while turning into the tool holder until it latches. Take care that the dust protection cap 2 is not damaged. The chisel can now be turned by hand to the required working position. return the rotation stop switch 4 to the initial position . The chisel latches automatically as soon as it is radially loaded by the working or chiselling process. IMPACT DRILLING - CHISELING Wear protective glasses and hearing protection. The performance is not increased in this manner. The most effective method for chiselling is to break out only small pieces of material. When chiselling, work only with protective glasses and the auxiliary handle 12. Check before starting to work if the rotation stop switch 4 is engaged in the position. dRILLING IN TILES Start drilling slowly on the tile. After the tile is drilled through, switch to impact drilling. SCREWDRIVING Screwdriver bits can be inserted into the adapter 13 (accessory). The screwdriver bits are held in the adapter with a spring ring. For drilling work in metal, wood and plastic with drills that have normal shafts, a drill chuck (13 mm max. All common drill chucks with 1/2" x 20 UNF internal threads (13 mm max. MOUNTING THE CHUCK Before any work on the machine itself, pull the mains plug! clean the threads of the drill chuck (accessory) and the adapter 13 (accessory). Screw the drill chuck onto the adapter and lock the adapter in the same manner as a drill in the tool holder. Remove the load from the machine immediately by pulling back the drill. Always hold the machine firmly with both hands and take a secure stance. [. . . ] We reserve the right to repair defective parts or replace them with new parts. Improper use or handling as well as opening of the machine by unauthorised repair agencies voids the guarantee. Parts subject to wear are excluded from the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS PSE 75 EDITION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS PSE 75 EDITION will begin.
