User manual KRUPS 178

[. . . ] · To reduce the risk of fire or electric shock, do not remove the base of the machine. There are no user serviceable parts inside. Repairs should be performed by authorized KRUPS service personnel only. SPECIAL CORD SET INSTRUCTIONS Regarding your Cord Set: A A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. B Longer extension cords are available and may be used if care is exercised in their use. [. . . ] To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. Congratulations and thank you for choosing the Krups Orchestro Dialog Fully Automatic Espresso Machine with Auto-Cappuccino device. The Orchestro Dialog can prepare professional-quality espresso, cappuccino or latte at the touch of a button. You can program this machine to your personal preferences, from the strength of your espresso to the size of the cup to cleaning this machine - it's fully automatic!The digital interface walks you through each step to simplify the espresso experience. Please read this operating manual and keep it in safe place. Understanding these instructions and complying with the directions are essential to ensure safety and handling of this machine. Ground coffee collector with detection system Cup keepwarm tray Operating panel / Display / Coffee buttons Removable water tank Adjustable coffee outlets Removable collector for used ground coffee Drip tray grid Grinding level setting Coffee bean compartment Hot water button Steam button Auto-cappuccino accessories Steam / hot water nozzle Tray full indicator Removable drip tray Accessories (No. art. F088) Measuring scoop/ Nozzle key Water hardness strip Filter cartridge (No. art. F055) KRUPS cleaning tablets (No. art. F054) KRUPS descaling powder First use Installation If your appliance shows signs of wear, these originate from application tests under practical conditions which we carry out on appliances. Remove protective foil Remove paper strip Pull out cord Insert plug (110V) Water/Filter - do not fill with hot water, mineral water, milk or other liquids MAX Remove tank *Insert filter Packaging Fill up to the «MAX» mark Replace tank *optional filter Beans - fill with max. Clean the container and fill it 1/3 with water 2. 3 Connect the other end to the nozzle 4. Press Press PREHEATING STEAM STEAM READY PRESS STEAM Problems Coffee is not hot enough No steam/hot water from the nozzle No proper frothy milk - Pre-heat cups with hot water - Change temperature setting Note: Coffee should not be boiling - Nozzle blocked?-> use fine needle to unblock it - Nozzle blocked?-> use fine needle to unblock it - Check that the frothing aid is fitted Only use very fresh, chilled milk correctly - Prepare several espressos to clean grinder. If this does not work, call KRUPS Customer Services. Note: you should still be able to prepare an espresso with ground coffee. Insert drip tray without used coffee collector 3. Plug-in appliance and switch on again 4. Insert used coffee collector Grinder makes loud noise (foreign body in the grinding gear) 10. When the water has run through ­> Press 11. [. . . ] 2 secs STEAM Collecting tank can no longer be replaced As protection against frost damage during transport - Take out drip tray and used coffee EMPTY DRIP TRAY AND USED COFFEE stays on display ground collector and replace them after 10 seconds CONTAINER UNDER STEAM NOZZLE PRESS HOT WATER BUTTON DESCALE CLEAN Display alternates RINSE - Position drip tray and coffee collector correctly and restart the appliance 5. A little water runs out ­> display goes out - Switch off the appliance and allow it to cool 0036198/209/1003/1500 . . . are no longer in the list LIMITED WARRANTY This Krups product is warranted for 1 year from the date of purchase against defects in material and workmanship. During this period, the Krups product that, upon inspection by Krups, is proved defective, will be repaired or replaced, at Krups's option, without charge to the customer. [. . . ]