User manual KRUPS 880

[. . . ] Never direct steam or hot water spray toward the body: danger of burns. Close supervision is necessary when any appliance is used near children. Unplug the appliance when not in use and before cleaning. let it . cool before putting on or removing parts and before cleaning. [. . . ] t until the end of the second flow, and you can now enjoy your espressos. . Wai . THE FROTH STEAM FUNCTION . THE ESPRESSO FUNCTION Youhave now prepared your appliance for use. The indicator lights on the controls (d1) and (d2) are lit and the water tank and the coffee bean compartment have been filled. You can adjust the height of the flow depending on the size of the cup being used (4). ng the regulator knob for cup-fillquantity (d4). choose the amount of coffee/espresso desired. The minimum setting corresponds to 30 ml (about 10z. ) and the maximum setting to 250 ml (about 8. 5oz. ). While the coffee/espresso is flowing, you can increase or reduce the quantity selected by turning the quantity knob (d4) to the right or to the left. . Placea . Usi . Presst . Wai Steam is used to froth milkto whip up a cappuccino and is also used for heating liquids. As the production of steam requiresa higher temperature, the appliance allowsfor a pre-heating phase to build-up the steam. The indicator light on the controls (d1 and d2) are lit. ectthe steam selection control button (d3). The indicator light willflash and the indicator light of the coffee button (d2) will go out. When the indicator light of the steam selection control (d3) becomes steady, the. hot . Hol . Then, d back the milk froth with a spoon and pour the steamed milk into your espresso. spoon the milk froth on top of the beverage to complete a delicious cappuccino. "off" position. The indicator light on the control (d2) should now be steady. Your appliance is now ready to make an espresso or produce hot water again. . Tur . Ret water nozzle (g). n steam selector knob (e) on ~ and the outflow of water will stop automatically when the machine has cooled. The indicator light willflash and the indicator light of the coffee button (d2)will go out. When the indicator light of the steam selection control (d3) becomes steady, the appliance is ready to produce steam. . Remove . Sel . Pl . THE HOT WATER FUNCTlON the perfect froth attachment (h). ect the steam selection control button Your appliance also allows you to heat water. The indicator lights on the controls (d1 and d2) are lit. Do not press the steam selector control button (d3). . Pl . Turnthe ace a container under the steam/hot water ace the frothing pitcher or cup containing nozzle (g). nozzle on~ by turning the steam selector knob towards you (8). 12KRUPS . [. . . ] steam selector knob (e) on \!!Y. low 1/3 of the water tank to flow through n the steam selector knob (e) "off". . Turnthe . Al . Tur . Tur (about 40 seconds) the nozzle. n off the machine by pressing the Onl Of button (d1). The indicator light will go out. y the container. Let the machine sit for . Empt To ensure that your appliance is working at its best and for top quality coffee, we recommend that you descale your KRUPS appliance at regular intervals. [. . . ]