User manual KRUPS C50

[. . . ] Light will blink on one of the coffee touches: heating up for approximately 25 seconds Steady light: ready. voyant allumé en continu : prêt. The machine can be turned into OFF mode at any time when slider is closed by pushing and holding any touch control for more than 3 sec. 9 PRÉPARATION DU CAFÉ/ COFFEE PREPARATION FR 11 EN 12 13 14 Lungo 110 ml Espresso 40 ml Ristretto 25 ml Remplissez le réservoir d’eau avec de l‘eau potable Fill the water tank with potable water. [. . . ] Machines turns to Off mode automatically when empty. Do not use any strong or abrasive cleaning agent or solvent cleaner. Never immerse the appliance or part of it in water. n’immergez jamais la machine dans l’eau , en totalité ou en partie. Clean the coffee outlet regularly with a damp cloth. Read the safety precautions on the descaling package and refer to the table for the frequency of use (see Descaling section in this manual). 13 14 Videz le bac d’égouttage et le conteneur de capsules usagées. Empty the drip tray and the used capsule container. remplissez le réservoir d’eau de 0 , 5 l d’eau et ajoutez le liquide de détartrage Nespresso. Fill the water tank with 1 unit of Nespresso descaling liquid and add 0. Activate the machine by either pushing the slider or one of the cup selection touches. To enter the descaling mode, push all the 3 controls simultaneously for at least 3sec. If slider is closed, push any control to start descaling. Refill the water tank with the used descaling solution collected in the container and touch any control to repeat the procedure. Empty and rinse the water tank, capsule container, drip tray and cup support thoroughly. When ready, touch any control to rinse the machine. To exit the descaling mode, push all the 3 controls simultaneously for at least 3sec. Avoid contact with eyes, skin and surfaces. Never use any product other than the Nespresso descaling kit available at the Nespresso Club to avoid damage to your machine. The following table will indicate the descaling frequency required for the optimum performance of your machine, based on water hardness. [. . . ] Now we are engineering environmental benefits into the design of our new and future machine ranges. LIMITED WARRANTY Krups warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Krups will either repair or replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original warranty or six months, whichever is greater. [. . . ]