User manual KRUPS ESSENTIAL AUTOMATIC ESPRESSO EA8100

[. . . ] You are now the proud owner of an Espresso Automatic EA815-EA816-EA817 Series. With your machine, you can make a wide range of drinks: espressos, coffees or ristrettos, completely automatically. You can also make milk-based drinks such as cappuccinos. It has been designed so that you can enjoy restaurant quality coffee at home, whatever the time of the day and every day of the week. [. . . ] Rinsing the circuits : Press the maintenance and settings button (27). The function indicator is shown above the maintenance button . If necessary, using the navigation button, select the rinse symbol . Press START , rinsing starts and finishes when the coffee menu appears. Automatic rinsing of the circuits when the machine starts. You can choose to program the machine to be rinsed automatically each time it is turned on. To do this, press the maintenance and settings button (27). Using the navigation button , select the automatic rinsing programming symbol . Press the button to choose ON which confirms this program. If you press the , button, automatic rinsing is disabled. You can return to the coffee types menu by pressing the button. Warning : after this rinsing process, hot water will be released from the coffee jet. Ensure that the drip tray is in place even when the machine is not being used. The cycle lasts only a few seconds and stops automatically. cleaning program - total duration: approximately 13 minutes You do not have to run the cleaning program as soon as the appliance requests it, but it must be done reasonably soon after. If cleaning is postponed, the alert message will remain illuminated until the process is carried out. When the symbol lights up, you can run the automatic cleaning program by pressing the maintenance and The function indicator is shown above the maintenance button . The automatic cleaning program is divided into 2 stages: the cleaning cycle itself, followed by the rinse cycle. You can clean the machine at any time by pressing the maintenance and settings button then, using the navigation button select the cleaning symbol . To run this cleaning program, you will need a container which holds at least 0. 6 L and which can be placed beneath the coffee jets and the steam nozzle. Fill the water container to its maximum level of 1. [. . . ] The coffee fineness knob is difficult to turn. Only change the grinder setting when it is running. The espresso or coffee is not hot enough. Increase the coffee temperature in the Maintenance and settings menu . [. . . ]