User manual KRUPS FRESHAROMA 619

[. . . ] The glass carafe or thermal jug is designed for use with this appliance. Do not set a hot container on a wet or cold surface. Do not use a cracked container or a container having a loose or weakened handle. Do not clean container with cleansers, steel wool pads, or other abrasive material. [. . . ] After about 1 - 2 minutes of brewing, the coffee is released and flows into the coffee carafe. The KRUPS exclusive Flavor Release Technology thus guarantees you optimal contact between water and ground coffee and the ideal time for brewing, particularly for small quantities. Thanks to the KRUPS exclusive technology, your coffee will have a fuller, richer aroma and a delicious taste. - Lid for thermal coffee carafe When the thermal coffee carafe is inserted in the coffee maker, the middle of the lid retracts Remember: After about 1 - 2 minutes of brewing, the filter holder allows the water to flow into the coffee carafe. This steeping period allows for maximum flavor extraction from your coffee. Using the thermal carafe, pour in the desired quantity of cold water (2). The water level indicator (g) shows how much water you are filling into the container. The amount of freshly brewed coffee delivered after the brewing process will always be slightly less than the amount put into the water container. This is due to the minimum absorption of the water by the ground coffee. Therefore, it is recommended that you add a little extra water at the beginning so that you will have the number of cups you desire. Close the thermal coffee carafe lid by twisting it tightly to the right (3). at the pre-programmed time , the indicator light will illuminate , indicating that the brewing process has begun. Note : If the selector switch is left in the "auto" position, the coffee maker will turn itself on everyday at the pre-programmed time. If you do not wish for this to occur, turn the coffee maker to the "off" position after each use. Do not pour any liquid other than cold tap Water with vinegar into water chamber when cleaning. Attention: Do not leave solution within reach of children. Always unplug the coffee maker before Your coffee maker and thermal coffee carafe Decalcifying When to decaclicfy: - Minerals found in water can clog the coffee maker or reduce its speed. You will know when such a cleaning is necessary by an obvious slowdown in the brewing time. This extended time indicates that there is a calcium deposit in your coffee maker. - You will generally only need to descale every two to four months depending on the hardness level of your water. to decalcify: · Fill the carafe one quarter full of vinegar, then add cold tap water to the top. Pour the water/vinegar mixture into the reservoir opening (2). [. . . ] Freshly ground beans deliver more aroma and flavor. Environmentally-friendly materials which should be disposed of according to the local recycling arrangements. Disposal methods for the appliance itself can be found by inquiry at the appropriate department of the local authority. Your KRUPS #197, #199 or #229 is covered by the following warranty: If from date of purchase within one year this KRUPS product fails to function because of defects in materials or workmanship, KRUPS will, at its option, repair or replace the unit with our charge, provided the owner has a proof of date of purchase. [. . . ]