User manual KRUPS OBLO YY2291FD

[. . . ] Allow to cool before putting on or taking off parts, and before cleaning the appliance. Q Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. call KRUPS Consumer Service Department (see GUARANTEE OF PERFORMANCE) for repair procedure. Q The use of accessory attachments not recommended or sold by KRUPS may result in fire, electric shock or personal injury. [. . . ] You can raise or lower the delivery pipe to suit the size of your cups (15). (Remember that you can change the degree of coarseness during the actual grinding). Following this, the coffee-meal will be moistened with a little water for the prebrew. After a short pause, the proper brewing operation will be carried out. Note: If you press the key, you will obtain one cup of strong espresso or coffee. The simultaneous preparation of two cups of strong espresso or coffee is not possible. If you accidentally actuate the key, you can cancel the action by pressing the or the key. Place a receptacle beneath the espresso delivery pipe, however, as a little water will run out. You have already prepared the appliance. When the rinsing process is finished, the following lamps will glow: "rinse"; "1 cup normal"; "1 cup strong"; "2 cups"; "coffee-meal". S Open the lid of the coffee feed funnel and put in one or two level measuring spoonfuls of espresso- or coffee-meal (16). You can then prepare espresso or coffee as usual. With this appliance, you can prepare hot water for making instant drinks, etc. S Place a cup beneath the steam nozzle and turn the selector knob for steam/hot water to the position. S When the cup is sufficiently filled with hot water, return the selector knob to the position. A rinsing operation will then be automatically carried out, after which the appliance will switch itself off. Note: This rinsing operation will also be carried out when the pre-set automatic switch-off mechanism comes into play. S Always pull out the mains plug before any cleaning operation and allow the appliance to cool down. Do not use any materials which scratch, scrape or corrode. Wipe the casing inside and outside with a moist cloth only. S Clean the drawer, drawer attachment, spent coffee holder and base grid with warm water and washing-up liquid (25). S Rinse out the water tank with fresh water. [. . . ] Then dry them thoroughly and return them to the appliance. Appliance indicator(s) Note: If there is too little water for the rinsing operation in the water tank, the "fill water tank" indicator will glow. Note: If, during the course of the de-scaling programme, the key is pressed, or if there is a power failure, the programme will have to be restarted from the beginning. Driving off steam from the heating system Before you transport the appliance, you must empty the heating system, particularly if there is danger of frost damage. [. . . ]