User manual KRUPS XN 900T VERTUO PLUS GRIS

[. . . ] 18 07:49 EN FR Nespresso Vertuo is an exclusive system creating a perfect coffee, from the Espresso to the large Alto, time after time. Nespresso Vertuo machines are equipped with the unique Centrifusion® technology to gently extract an Alto, Mug, Gran Lungo, Double Espresso or Espresso at the touch of a button. Each extracting parameter has been carefully defined by Nespresso coffee experts to ensure that all aromas from each capsule can be extracted to give the coffee body and create an exceptionally rich and generous crema. COM - VOIR LA PAGE DES MACHINES These instructions are part of the appliance. [. . . ] The machine head will open automatically, with an electrical mechanism. 18 07:50 EN FR NOTE: 7 The factory settings and recommended cup sizes are: Alto: 414 ml Gran Lungo: 150 ml Mug: 230 ml Double Espresso: 80 ml Espresso: 40 ml Insert a capsule with the dome shape facing downward. NOTE: To avoid damaging the machine, use only fresh, unused capsules. Ensure previous capsule has been ejected before inserting a fresh one. 9 Push the button to start the brewing process. Green light will rotate slowly during the barcode reading and prewetting phase. NOTE: You can do this even when the machine is still heating up. Never immerse the appliance or part of it in water. Clean the coffee outlet regularly with a damp cloth. Please use only clean cloths for cleaning the machine. 2 1 1 2 Rinse and clean the water tank and lid before filling it with fresh potable water. 3 2 1 Open the machine head by pushing the lever up and let the used capsule be ejected, then close the machine. Push the button 3 times in 2 seconds to start the cleaning cycle. Orange light will blink during the cycle. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 5 minutes. The procedure consists of 3 cycles of pumping water in, internal cleaning and water flowing from the outlet to complete. 5 The procedure can be stopped at any time by pushing the button. The button will go to steady GREEN light when ready for brewing. To restart the cleaning process, follow the instructions starting at point 4. To brew a coffee, insert a capsule, push the lever down to close the machine and push the button. 18 07:50 RESET TO FACTORY SETTINGS / RÉINITIALISER LES PARAMÈTRES DE RÉGLAGE D’USINE NOTE: Choose Special Function by pressing the lever down: 1 time for "Descaling". [. . . ] †↣Turn the machine OFF, unplug the power cord, wait for 15 minutes for the machine to cool down. †↣Plug the power cord and turn the machine ON by pressing the lever down. †↣Machine is cooling down and will go to steady green when ready. †↣Special Function running; open the machine head and let the capsule be ejected. [. . . ]