User manual KRUPS XN903

[. . . ] FR Nespresso Vertuo is an exclusive system creating a perfect coffee, from the Espresso to the large Alto, time after time. Nespresso Vertuo machines are equipped with the unique Centrifusion® technology to gently extract an Alto, Mug, Gran Lungo, Double Espresso or Espresso at the touch of a button. Each extracting parameter has been carefully defined by Nespresso coffee experts to ensure that all aromas from each capsule can be extracted to give the coffee body and create an exceptionally rich and generous crema. These instructions are part of the appliance. [. . . ] It is possible to restore cup size volumes; refer to "Reset to factory settings" section. CAUTION: Do not use any strong or abrasive cleaning agent or Never immerse the appliance or part of it in water. Clean the coffee outlet regularly with a damp cloth. Please use only clean cloths for cleaning the machine. Before filling it with 3 Open the machine head by pushing the lever up and let the used capsule be ejected, then close the machine. 4 Push the button 3 times in 2 seconds to start the cleaning cycle. Orange light will blink during the cycle. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 5 minutes. The procedure consists of 3 cycles of pumping water in, internal cleaning and water flowing from the outlet to complete. 5 The procedure can be stopped at any time by pushing the button. The button will go to steady GREEN light when ready for brewing. To restart the cleaning process, follow the instructions starting at point 4. To brew a coffee, insert a capsule, push the lever down to close the machine and push the button. NOTE: Choose Special Function by pressing the lever down: 1 time for "Descaling". 2 times for "Emptying the system". 3 times for "Reset to factory 1 Turn the machine "OFF" by pushing the lever down for 3 seconds. - 3 times for "Reset to factory settings" NOTE: the machine will blink 3 times every 2 seconds until the button will be pressed. NOTE: Choose function within 2 minutes or else the machine will go back to Ready mode. ORANGE light will blink 3 times every 2 seconds, indicating the "Factory reset" function. 2 To enter "Factory settings" mode, push the button and the lever down at the same time for 3 seconds. ORANGE steady light indicates entry into the Special Functions menu. [. . . ] Press the lever up and wait until the machine head stops, release any obstacle if applicable, empty the capsule container if necessary, and then press the lever down to close the machine head. Turn the machine OFF, unplug the power cord, wait for 15 minutes for the machine to cool down. Plug the power cord and turn the machine ON by pressing the lever down. Machine is cooling down and will go to steady green when ready. [. . . ]