User manual KRUPS YY2794FD

[. . . ] First Use (or after a long period of non-use)/Première utilisation (ou après une longue période de non-utilisation) 14 Settings mode: Emptying the System before a period of non-use or for frost protection/ Nespresso is an exclusive system creating the ultimate Espresso, time after time. All Nespresso machines are equipped with a unique extraction system that guarantees up to 19 bar pressure. Each parameter has been calculated with great precision to ensure that all the aromas from each capsule can be extracted, to give the coffee body and create an exceptionally thick and smooth crema. CAUTION: when you see this sign, please refer to the safety precautions to avoid possible harm and damage. [. . . ] Multiple devices can be connected to your Nespresso Expert machine only if using a unique Club Members number. To pair these additional devices, please follow the instructions in the Before making any coffee, make sure to rinse your machine by: Close the slider, select the Lungo icon and press the brewing button. If process doesn't start at first attempt and maintenance light steady ON, press brewing button again. If process doesn't start at first attempt and maintenance light steady ON, press brewing button again. Turn the machine OFF by turning the temperature dial anti clockwise until it reaches 0 temperature. The light will blink for 5 seconds before shutting off. During heat up, you can select any coffee preparations and press the brewing button. The coffee will then flow automatically when the machine is ready. Fill the water tank with fresh drinking water. Recipe glass, slide the cup support across the metalic base of the machine. To ensure hygienic conditions, it is highly recommended to change the water after a long period of non-use and to not reuse a used capsule. The highest temperature setting is very hot, we recommend to use a cup with a handle. Open the slider, insert a capsule and close the slider. ristretto (25 ml) Espresso (40 ml) Lungo (110 ml) Americano (25 ml coffee; 125 ml hot water) Hot water (200 ml) To select your recipe, turn the beverage dial until the desired beverage. Then select the desired temperature by turning the temperature dial. Push the brewing button on the top of the machine. The capsule will eject automatically after 10 seconds. To stop the coffee flow, press the brewing Button or slightly move the slider towards the right of the machine. Please note, a manual top-up is not possible in this case. To manually top up your beverage, press the brewing button within 10 seconds from the end of preparation. For water top-up you may add manually by selecting the water icon on the beverage button. Please note the temperature cannot be changed during the brew. [. . . ] - Ensure the smartphone or tablet is placed next to the machine (max distance 20 cm) during the pairing. - Make sure to not turn ON any microwave close to the machine during pairing. - Note: In case of an unpairing, all the setups and specifications will be lost and The machine will be reset to factory settings. - Check that no capsule is blocked inside the machine. [. . . ]