User manual KRUPS YY8205 FD

[. . . ] For your safety, your filter holder is equipped with a locking system to keep it in place when the pressure rises. Steam position g Percolation head h Filter holder with grounds or pod ejection system and gradual coffee tamping system: KTS "Krups Tamping System": Compatible with ground coffee (1 or 2 cups) and ESE or soft pods i Drip tray grid j Drip tray with level indicator k Multidirectional steam nozzle l Cappuccino accessory 2. SAFETY INSTRUCTIONS Before turning your espresso machine on, read these instructions for use carefully. This appliance is intended to be used in household and similar applications : - staff kitchen areas in shops, offices and other working environments; - farm houses - by clients in hotels, motels and other residential type environnements; - bed and breakfast type environments. [. . . ] Be sure to place all the paper inside the filter holder, otherwise there might be leaks. If the pod is not positioned correctly, the result in the cup will not be satisfactory. wITH A SOFT POD Your machine is also compatible with soft pods (usually 60 mm in diameter). Given that this kind of pod is not specifically designed for espresso machines, you will get a less full-bodied espresso than with an E. 54 English Fill the water tank and turn the machine on (fig. During the pre-heating phase, the indicator lamp will flash. If the pod is not positioned correctly, the result in the cup will not be satisfactory. STEAM FUNCTION Steam is used to foam up milk (for example to make a cappuccino or a cafe latte) thanks to the cappuccino accessory. To produce steam, the pump works by emitting an intermittent noise. After using the steam function, the appliance cools automatically by pumping cold water through the heating system. During the pumping cycles, the excess steam in the heating system is released with the hot water into the drip tray. For thorough cleaning of the cappuccino accessory, see paragraph 8, "Cleaning and Maintenance". 55 English USING THE KRUPS XS-6000 AUTO-CAPPUCCINO SET TO FROTH MILK (SOLD SEPARATELY) The auto-cappuccino accessory makes it easier to make a cappuccino or a caffe latte. It is made up of a special dual-position nozzle, a stainless steel milk container and a pipe. Choose the caffè latte or cappuccino position on the special nozzle. Fill up the milk container and place a cup or a glass underneath the special auto-cappuccino nozzle. Turn the switch to the “steam preheating” position. € Once the light has stopped blinking, turn the switch to the “steam” position. Once the froth has been formed, turn the switch to the “stop” position. The appliance will now automatically cool itself by launching 3 intermittent pumping cycles. Once this is automatic operation is complete, you can make a coffee. To prevent the milk from drying on the auto-cappuccino accessory, we strongly recommend. [. . . ] The valve is blocked by when it is carried. If the fault persists, do not use the appliance, contact an approved service centre. 59 English Problems Crackles are heard in the filter holder. Possible causes Normal phenomenon: the filter holder security lock. [. . . ]