User manual KURZWEIL KME-61 VERSION 2 SOFTWARE SUPPLEMENT

[. . . ] KME-61 VERSION 2 SOFTWARE SUPPLEMENT -Jan. 2004- · What Is It? Software version v2 is the latest set of feature enhancements for the KME-61 keyboard. · What Does It Do? (i. e. what are the new features in v2?) v2 adds new controller features to the KME-61: -the ability to program independent controller assignments per zone within a setup. [. . . ] The selected zone is shown in the upper left corner of the display. Then use the + button to turn On or - button to turn Off Mono Pressure in that zone. 2 12. Pitch Wheel Press the Menu Down button once again to see the Edit Pitch Wheel screen. Z1:Edit Pitch Wheel PWheel: On This parameter allows you select which zones are affected by the pitch wheel. Select the zone and on/off setting as with Mono Pressure described above. Each of the remaining controllers has two parameters: MIDI Controller Number and Entry Value which is the initial value sent when the setup is selected. 13. Data Slider The next screen after Edit Pitch wheel (see above) is Edit Data Slider. Z1:Edit Data Slide CtrN:6 EntV:None You can move the indicator (->) to select the MIDI Controller Number (CtrN) or Entry Value (EntV) by using the Menu Up/Down buttons. Select the zone with the soft buttons under the display and change the value with the + and ­ buttons OR by moving the front panel "Data Slider". The default CtrN for the data slider is 6, MIDI Data Entry. Additionally, each parameter can have a value of "None". When you choose a value of "None", it has a special function. If CtrN is set to None, the controller will not send any MIDI messages for the zone and will not affect the sound of the program selected for the zone. If EntV is set to None, the entry value will be the current value (physical position) of the data slider 14. Modulation Wheel (Mod Wheel) The next screen after Edit Pitch Wheel is Edit Mod Wheel. Press the Menu Down button once or twice to reach it. Z1:Edit Mod Wheel CtrN:1 EntV:None The parameters, editing method and available values are the same as for the data slider. The default MIDI Controller Number for Modulation wheel is 1 (Mod Wheel) 15. Continuous Controller Pedal (CC Pedal) The next screen after Edit Mod Wheel is Edit CC Pedal. Press the Menu Down button once or twice to reach it. Z1:Edit CC Pedal CtrN:11 EntV:None 3 KME-61 Addendum The parameters, editing method and available values are the same as for the data slider. [. . . ] As this is a "switch type" controller, entry values of 63 or less are treated as "Off". Entry values of 64 or more are treated as "On". Compatibility between V1. xx and V2 front software Version 2 front software can import setups saved from v1. xx. However, v1. xx cannot import v2 setups, because of their increased size. 4 [. . . ]