User manual KURZWEIL MARK 110 EASY INSTRUCTIONS

[. . . ] ¥Play the lower notes with a light touch, then strike harder to hear the timpani AND the strings. Layering preset sounds (example) ¥While holding down the GRAND PIANO button (in SOUND SELECT section), press the STRINGS 2 button and then let go of both. To lower volume of the second instrument ¥While holding down the GRAND PIANO button (in SOUNDS section), press the STRINGS 2 button six times and then let go of both. Create a keyboard split with bass and another instrument ¥Press any of the four bass presets (in LEFT SPLIT section). [. . . ] (in STYLES section) ¥Save as a PANEL SET to recall immediately (see #13). Change chord recognition mode ¥Press the button below BASIC twice until ADVANCED or CHORD/INV is lit (in the AUTO ACCOMPANIMENT section) ¥ Repeat instructions to 4a and ignore step 3. Play full chord instead of individual note to start style. Record your own song ¥Press the SONG 1 button in the RECORDER section (if the TRACK buttons below it are lit, there is a song already there. If so, push the SONG 2 button or until you find an empty song (no lights below in TRACK 1-8). ¥If all songs are full, see instructions to #6 ¥Select your instrument sound ¥Press the RECORD button. Track 1 light should flash ¥Press the PLAY/PAUSE button and begin to play. ¥When finished, press the STOP button ¥Press the PLAY/PAUSE button to hear your recording. To add more tracks ¥Select new sound ¥Press the RECORD button (track 2 light should flash) ¥Press the PLAY/PAUSE button and begin to play. ¥When finished, press the STOP button. You have a maximum of 6 more tracks to record on. Punch-in ¥Press the PUNCH IN button (in RECORDER section). ¥Press the track you desire to punch in (1 through 8) ¥Start the procedure by pressing the PLAY button ¥Press the PUNCH IN button at the moment you choose to rerecord. ¥Begin playing ¥Press the PUNCH IN or the STOP button again to STOP rerecording. Erase all existing songs in Kurzweil's RECORDER section ¥Find the MIDI button (in OPTIONS section). ¥While holding down the MIDI button (with your left hand), press the highest white key (C) with your right hand. All lights on the keyboard will flash and momentarily turn off. After the lights come back on, all songs in the RECORDER section will have been deleted. To format a blank disk ¥Press the Format button (in OPTIONS section) ¥Press the button under 'Y' ¥Look at your floppy disk. If 'HD' appears on the upper right side of the metal slider, ¥Insert disk into the drive on right side ¥select the button under 'H'. [. . . ] A number '1' should appear in the window. ¥Now press the MIDI button and try each of the next six black keys (D#1 to D#2) to sample the seven different settings. Panel Save ¥Set up the Mark 10/110/150 as you desire ¥Press the PANEL SET button (in OPTIONS section). ¥Press any flashing Panel button (1-9) ¥To recall, press the PANEL RECALL button ¥Press the panel button you previously set (1-9) when needed. [. . . ]