User manual KURZWEIL RE-220

[. . . ] 178-353 Gajwa-dong, Seo-gu, Incheon, KOREA Tel:82-32-580-1500 Fax:82-32-584-4863 AND Music Corporation 10107 South Tacoma Way, Suite A-3 Lakewood, WA 98499 Tel:(253)589-3580 Fax:(253)589-3585 2006. 15 Rev. A RE-220 Digital Piano Owner's Manual Table of Contents Important Safety & Installation Instructions Important Safety Instructions The Front Panel of the RE-220 Introduction The Features of the RE-220 Setting up the Instrument Listen to the Demo Songs The Keyboard and Pedals The Keyboard The Pedals Sound Select Variation List of Preset Sounds and Their Variations Drum and Percussion Key Assignments Drum Kit Maps Sound Expression by Pedals Layering Sounds Left Split Activate Left Split Split Point Custom Digital Reverb & Effects Volume Bass and Treble Reverb and Effect Reverb/Effect Wet/Dry Mix Recorder 4 5 6 8 8 9 12 14 14 14 15 15 16 16 17 18 19 20 20 20 21 22 20 22 23 24 Song Track Record Play/Stop Start Control Display while playing and recording Metronome Adjusting Tempo Adjusting the time signature Tap Tempo Options Demo MIDI/Preference Transpose MIDI MIDI Connection MIDI Channels MIDI Messages Miscellaneous Bottom Panel Rear Panel Appendix Specifications List of Sounds and Pedal Assignments Piano Demo Song List MIDI Implementation Chart 26 26 26 26 27 27 28 29 29 29 29 30 30 30 38 39 39 40 41 44 44 44 45 45 46 47 48 www. ycpiano. co. kr www. kurzweilmusicsystems. com The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING : When using electric products, basic precautions should always be followed, including the following: 1. Read all of the Safety and Installation Instructions and Explanation of Graphic Symbols before using the product. [. . . ] This lets you record over a previous track, for example. The track that is being recorded has a blinking button. That track cannot be turned off during recording. When a track is recorded, the sound that was used during recording is remembered with the track. Record Pressing the Record button while a song is stopped will put the song in recordready mode and the Record button blinks. Select the track on which to record as described in the discussion of the Track buttons. Press the Record button again to cancel recording. Once you start recording by pressing the Play/Stop button or using `Key Start' or `Pedal Start' (described below) the Record button stays lit continuously. Press the Play/Stop button to stop recording. If the memory becomes full during recording. "Ful" will appear on the display and recording will automatically stop. (All Recorded data up to that point will be saved. ) 26 Recorder Erasing A Track To erase a track on which something is recorded, you simply record "nothing" over it; that is, you select the track for recording, start and stop the Recorder, but don't play any notes or touch any controllers while recording. Changing Sound on a Track After a song is recorded with one sound on a track, you can replace it with another. This gives a chance to listen to your playing with different instruments. Select a song with recorded data, and press the Record button to enter record-ready mode. Then, a track button blinks with the Record button. If it's not the Track button which has the sound you want to replace with new sound, press the other Track button. Now it's ready to change the sound on a track. Press the button in the Sound Select portion to choose the sound you want, and press the Record button again to exit record-ready mode. Be cautious not to press the Play/Stop button, which erases the recorded data. Press the Play/Stop button to listen to the song played with the new sound. Changing Tempo on a Song You can change tempo to play the song that you recorded faster or slower without affecting the pitch. Select a song with recorded data, and press the Record button to enter record-ready moode. Now, change tempo by pressing the Up/Down button (or tapping the Tap/Tempo button). [. . . ] Similarly, the RE-220 recognizes these messages, unless the reception has been disabled. Refer to page 46 for Program Numbers of the RE-220 sounds. General MIDI On / Off Message The RE-220 recognizes the General MIDI On/Off messages received at the MIDI In port, and transmits the messages when GM On/Off parameter in the MIDI/Pref menu is changed. The form of General MIDI On/Off messages is as follows GM On F0 7E nn 09 01 F7 nn = device ID ( 00 - 7F; 7F = Broadcast) GM Off F0 7E nn 09 02 F7 nn = device ID ( 00 - 7F; 7F = Broadcast) ** GM On/Off messages are System Exclusive Messages. MIDI Messages 43 Miscellaneous Bottom Panel Headphone Jacks A headphone jack allows private practice. Plugging in a pair headphones turns off the speakers. [. . . ]