User manual KUSSMAUL 091-103-012

[. . . ] INSTALLATION INSTRUCTIONS TIME DELAY RELAY - DODO DELAY ON DROP-0UT Model 091-103-012 The Model 091-103-012 Time Delay Relay operates in a +12 volt electrical system. [. . . ] The output relay contacts are capable of switching 30 amperes. An adjustment is provided to vary this time at installation. An LED indicator adjacent to the terminal strip is lit whenever the relay is energized. Figure 2 illustrates the Time Delay Relay applied to a typical lighting circuit. Time Delay Adjust NOTE: The run/calibrate switch speeds up the time delay interval by a factor of 128. RUN CALIBRATE Model A B C D E Tmin 1. 25 min 6 min 12 min 4 sec 2 sec Tmax 6 min 27 min 60 min 15 sec 3. 3 sec Tset 3 min 15 min 30 min 10 sec 2 sec 1 second in the calibrate position is equal to 128 seconds in the run position FIGURE1 TIME DELAY ADJUST N. C. [. . . ] COM. Lighting Circuit LED illuminates when relay is energized 1 2 3 Lighting Control Switch +12 V FROM LIGHTING CIRCUIT BREAKER +12 volts Ground LIGHTS WILL REMAIN ILLUMINATED FOR THE TIME DELAY INTERVAL AFTER THE SWITCH IS TURNED OFF Figure 2 TYPICAL INSTALLATION IN A LIGHTING CONTROL CIRCUIT SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS KUSSMAUL ELECTRONICS COMPANY, INC. 170 CHERRY AVENUE, WEST SAYVILLE, NEW YORK, 11796-1221 USA JANUARY 9, 2002 TEL: 631-567-0314, FAX: 631-567-5826, [. . . ]