Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KUSSMAUL 091-11DV. We hope that this KUSSMAUL 091-11DV user guide will be useful to you.
Lastmanuals help download the user guide KUSSMAUL 091-11DV.
Detailed instructions for use are in the User's Guide.
[. . . ] BOOK# 091-11DV-1
rev. A: 8-30-05
INSTRUCTION MANUAL
AUTO CHARGE 11DV
AUTOMATIC BATTERY CHARGER
MODEL #091-11DV
NOTE : This charger is designed for vehicles with dual batteries and negative ground.
INPUT :115 or 230 volt, 50/60 Hz, 2amps OUTPUT : 11 AMPERES D. C.
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO. , INC.
170 CHERRY AVE. , WEST SAYVILLE, N. Y. 11796
TEL: in NY 631 567-0314 TOLL FREE: 800 346-0857 FAX: 631 567-5826
INTRODUCTION
The Auto Charge 11DV Battery Charger is a compact completely automatic charger designed for installation on vehicles with two batteries. [. . . ] The unit operates completely automatically and stops charging the batteries when they are fully charged. There is no trickle charge and therefore no danger of overcharging and water boil-off. Any parasitic loads on the battery such as radio, lights, etc. , are automatically supplied with current by the charger.
INSTALLATION
The Auto Charge 11 Automatic Battery Charger should be installed in an area with adequate ventilation. A power cord is supplied for connection to 115 or 230 volts 60 Hz. Mount the charger using the four holes provided for this. Connect the wiring from the batteries to the Output Terminal Strip. Spade lugs that have been securely crimped, or soldered, should be used. Ring lugs that have been securely crimped, or soldered, should be used. Double check all wiring before proceeding. Pilot light will light to show that the charger has power.
INSTALLATION WIRING DIAGRAM
115 or 230 voltage selector switch. NOTE: Do not apply 230 volts to the charger with the selector switch in the 115 volt position serious damage may result
Optional Bar-graph Indicator 091-11-127
3 AMP POWER
FUSE
OUTPUT INPUT L N
REMOTE
BAT 1
BAT 2
YE
RED
BL AC K
LLO W
Optional Economy Indicator
A. C. Input Power Line Neutral Ground
Chassis Ground Chassis Ground
091-11-102-XX
Chassis Ground
IMPORTANT: Charger output wire size is 14 awg. [. . . ] shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees others. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KUSSMAUL 091-11DV
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KUSSMAUL 091-11DV will begin.