Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KUSSMAUL 091-11PIM. We hope that this KUSSMAUL 091-11PIM user guide will be useful to you.
Lastmanuals help download the user guide KUSSMAUL 091-11PIM.
Detailed instructions for use are in the User's Guide.
[. . . ] BOOK# 091-11PIM
February 5, 2003
INSTRUCTION MANUAL
AUTO CHARGE 11 PIM
AUTOMATIC BATTERY CHARGER
MODEL #091-11PIM
NOTE : This charger is designed for vehicles with dual batteries and negative ground.
INPUT :120 volts, 50/60 Hz, 2. 5 amp max
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO. , INC.
170 CHERRY AVE. , WEST SAYVILLE, N. Y. 11796
TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826
INTRODUCTION
The Auto Charge 11PIM Battery Charger is a compact completely automatic charger designed for installation on vehicles with two batteries. [. . . ] This circuit breaker may also be use to disconnect these loads from the line. The fuse on the Auto-Charge 11PIM protects the charger only.
INSTALLATION
The Auto Charge 11PIM Automatic Battery Charger should be installed in an area with adequate ventilation. A power cord is supplied for connection to 120 volts 50/60 Hz. Mount the charger using the four holes provided for this. Connect the wiring from the batteries to the Output Terminal Strip. Spade lugs that have been securely crimped, or soldered, should be used. Double check all wiring before proceeding. Pilot light will light to show that the charger has power.
INSTALLATION WIRING DIAGRAM
WIRE SIZE CHART
CONNECTION ITEM DEFINITION WIRE SIZE
COM
BATTERY NEGATIVE CHARGING LEAD COMMON FOR BATTERIES BATTERY POSITIVE CHARGING LEAD #1 FOR BATTERY # 1 BATTERY POSITIVE CHARGING LEAD #2 FOR BATTERY # 2
12 AWG 12 AWG 12 AWG 16 AWG 16 AWG
IMPORTANT: Wire size is for a maximum length of 20 feet. If wiring is to be longer, larger wiring is required. Additional information is available on request. NOTE: Sense leads are shown connected to battery #1 but may be connected to either battery at the installers option. The sense leads however must be connected for the charger to operate. The charger does not require a 2 battery vehicle to function properly. For single battery vehicles connect to battery #1.
BAT 1 BAT 2
SENSE NEGATIVE NEGATIVE VOLTAGE SENSE SENSE LEAD. [. . . ] shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KUSSMAUL 091-11PIM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KUSSMAUL 091-11PIM will begin.
