User manual KUSSMAUL 091-12

[. . . ] DATE: 02-10-00 FILE: 091-12-XX INSTRUCTION MANUAL AUTO CHARGE 12 AUTOMATIC BATTERY CHARGER MODEL #091-12-XX NOTE : This charger is designed for vehicles with a single battery system 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO. , INC. 170 CHERRY AVE. , WEST SAYVILLE, N. Y. 11796-1221 TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826 INTRODUCTION The Auto Charge 12 is Battery Charger is a compact completely automatic charger designed for installation on vehicles with a single battery system. [. . . ] A power cord is supplied for connection to 115 volts 60 Hz. Mount the charger using the four holes provided for this. Connect the wiring from the battery to the Output Terminal Strip. Spade lugs that have been securely crimped, or soldered, should be used. Double check all wiring before proceeding. Pilot light will light to show that the charger has power. INSTALLATION WIRING DIAGRAM WIRE SIZE CHART CONNECTION ITEM DEFINITION WIRE SIZE BATBAT+ BATTERY NEGATIVE BATTERY POSITIVE NEGATIVE CHARGING LEAD FOR BATTERIES POSITIVE CHARGING LEAD FOR BATTERY # 1 NEGATIVE VOLTAGE SENSE LEAD. DETECTS VOLTAGE POSITIVE VOLTAGE SENSE LEAD. DETECTS VOLTAGE 12 AWG 12 AWG 16 AWG 16 AWG IMPORTANT: Wire size is for a maximum length of 20 feet. If wiring is to be longer, larger wiring is required. Additional information is available on request. [. . . ] shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]