User manual KUSSMAUL 091-26

[. . . ] BOOK# 091-26-12, 4-23-97 INSTRUCTION MANUAL AUTO CHARGE 3 AUTOMATIC BATTERY CONDITIONER MODEL #091-26-12 NOTE: THIS IS A CONDITIONER FOR MAINTAINING THE CHARGE IN A VEHICLE'S BATTERY. [. . . ] Indicator lights are provided to signal when the charger is charging and when the charging is complete. Construction of the Auto Charge 3 is extremely rugged to withstand the shock and vibration normally encountered by vehicle mounted equipment. The unit operates completely automatically and stops charging the batteries when they are fully charged. There is no trickle charge and therefore no danger of overcharging and water boiloff. Parasitic loads on the battery such as a radio, lights, etc. , up to a maximum of 2 amps are automatically supplied with current from the charger. INSTALLATION WIRING DIAGRAM WIRE SIZE CHART CONNECTION ITEM DEFINITION WIRE SIZE COM 1 2 BATTERY COMMON BATTERY NO. 1 BATTERY NO. 2 NEGATIVE CHARGING LEAD FOR BATTERIES POSITIVE CHARGING LEAD FOR BATTERY # 1 POSITIVE CHARGING LEAD FOR BATTERY # 2 14 AWG 14 AWG 14 AWG IMPORTANT: Wire size is for a maximum length of 40 feet. If wiring is to be longer, larger wiring is required. Additional information is available on request. SPECIFICATIONS SPECIFICATIONS: Input: 120 Volts, 60Hz, 1 amp Output Volts: 13. 25 volts nominal Output Current: 0-3 Amps D. C. output current determined by state of charge of batteries Charge Indicator: RED LED indicates charging current GREEN LED indicates fully charged Remote Charge Indicator Connector: permits locating Red/Green LED's at remote loaction Weight: 6 lbs OUTLINE DRAWING INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner WARRANTY All product of Kussmaul Electronics Company Inc. [. . . ] The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]