User manual KUSSMAUL 091-3

[. . . ] The voltage of each battery is individually controlled so that each battery is charged only as much as required. Once the batteries are fully charged, current stops flowing to guard against overcharging and water boil-off. [. . . ] Once the batteries are fully charged, current stops flowing to guard against overcharging and water boil-off. Of rugged construction, the charger is made to withstand the shock and vibration encountered in vehicle mounted equipment. Utilizing components which meet international safety requirements makes this charger ideal for worldwide applications. BATTERY CHARGER FEATURES Completely automatic operation, charges battery on demand Input voltage, switch selectable, 115 volt or 230 volts Output voltage regulated, eliminates overcharging battery Output, current limited to protect charger from overloading Optional charge indicators INSTALLATION The EURO CHARGER II automatic battery charger should be installed in an area with adequate ventilation. Mount the charger using the four holes provided. Connect the wiring from the batteries to the output terminal strip Double check battery wiring. Additional information is available on request. SPECIFICATION & OUTLINE SPECIFICATIONS: Input: see chart Output: see chart Output Current: see chart Charge Indicator: 0-15 amps 5% Weight: 11 lbs Model # 091-3-12 091-3-24 Output Current Output Voltage 12 Amps 6 Amps 12 24 Input Voltage 230/115, 50/60 Hz 230/115, 50/60 Hz Input Current 1. 3/2. 6 Amps 1. 3/2. 6 Amps Charge Indicator 15 amps 8 amps OUTLINE DRAWING INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped. Equipment is to be returned, shipping charges prepaid and will be returned, after repair, shipping charges paid. shall have no liability for damages of any kind to associated equipment arising from the installation and /or use of the Kussmaul Electronics Company, Inc. [. . . ] Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 3 years from the date the equipment was shipped. Equipment is to be returned, shipping charges prepaid and will be returned, after repair, shipping charges paid. [. . . ]