User manual KUSSMAUL 091-31-12

[. . . ] IM_091-31-12-115/230 Revision A, 12-09-04 INSTRUCTION MANUAL AUTO CHARGE 1 MODEL(S): 091-31-12-115 091-31-12-230 OUTPUT: 13. 25 VOLTS DC, 1 AMPERE. [. . . ] When the batteries are fully charged, all charging stops. Any load applied to the battery when the charger is connected and energized will automatically be supplied by the charger up to the maximum 1 ampere capacity. The Model 091-31-12-115/230 is factory set for 115VAC or 230VAC primary power operation at time of order. Please verify that installation primary power and 091-31-12-115/230 input power requirements are correct prior to installation and operation. SPECIFICATIONS: Input: 115VAC or 230VAC +/- 10 volts, 50/60 Hertz. Factory Set Output: DC, 13. 25 Volts, Ripple: less than 100 mv Current: 0 to 1 amp depending on battery state of charge Input Wiring: #18 AWG: Blue and Brown, Refer to Figure 1. Output Wiring: Via P1/J1: Refer to Figure 1 Power Indicator: none Weight: 19 ounces FIGURE 1 INSTALLATION and WIRING BRO WN BLUE 12 BRO WN BLUE + BATTE RY WIRECO R LO BRO WN BLUE * 50/ 60Hz VACCO CTIO NNE N 115/ 230VAC ACLine 115/ 230VAC ACReturn * 115VACO 230VACO RATIO SE AT FACTO R PE NT RY. CHE SE CK RIAL NUMBE TAGFO VACINPUT SE R R TTINGBE REINSTALLATIO FO N. INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. [. . . ] The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees others. [. . . ]