User manual KUSSMAUL 091-63-OV

[. . . ] FILE:091-63-OV REV A: 02-11-04 INSTRUCTION MANUAL LOAD MANAGER 1 OVER-VOLTAGE DETECTOR RELAY MODEL #091-63-OV A BATTERY SYSTEM VOLTAGE MONITOR WHICH DETECTS OVERVOLTAGE CONDITIONS 3 YEAR WARRANTY KUSSMAUL ELECTRONICS CO. , INC. 170 CHERRY AVE. , WEST SAYVILLE, N. Y. [. . . ] To do this, remove two screws holding down the cover. Note the position of the voltage adjustment trimmer. To decrease the voltage turn counter clockwise. Two indicator LED's are provided adjacent to the terminal strip. When the green LED is lit, the voltage sensed is normal. When the red LED is lit, the voltage is above the set point. The voltage detector can be tested by gradually raising the system voltage while simultaneously measuring the voltage applied to the input terminals with a precise voltmeter and noting the voltage at which the red LED turns "ON". WIRING DIAGRAM MODEL 091-63-0V OVER VOLTAGE DETECTOR RELAY NC NO C +- TO LOAD WILL BE ENERGIZED WHEN VOLTAGE SENSED GOES ABOVE SETPOINT +12V Fuse TO VOLTAGE SENSE POINT OVER VOLTAGE DETECTOR INSTALLATION SPECIFICATION & OUTLINE SPECIFICATIONS: Input Voltage: Input Amps: 10 to 16 volts D. C. . 020 amps, relay deenergized . 10 amps, relay energized Relay Contacts: 5 amperes max. , normally open 5 amperes max. , normally closed Case: Weight: non-weatherproof, polypropylene 4 ounces OUTLINE DRAWING INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner WARRANTY All products of Kussmaul Electronics Company Inc. [. . . ] The purchaser, by the acceptance of the equipment, assumes all liability for any damages which may result from its installation, use or misuse, by the purchaser, his or its employees or others. [. . . ]