Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KUSSMAUL 091-98-12. We hope that this KUSSMAUL 091-98-12 user guide will be useful to you.
Lastmanuals help download the user guide KUSSMAUL 091-98-12.
Detailed instructions for use are in the User's Guide.
[. . . ] If the solenoid is energized continuously it will OVERHEAT and BURN OUT. If the AUTO EJECT is installed where the rear mechanism can accumulate dirt, grime or water you must install a 091-18CP Rear Enclosure.
FAILURE TO FOLLOW THESE CAUTION NOTES WILL VOID THE WARRANTY
INSTALLATION INSTRUCTIONS 1. [. . . ] If the AUTO EJECT is installed where the rear mechanism can accumulate dirt, grime or water you must install a 091-18CP Rear Enclosure.
FAILURE TO FOLLOW THESE CAUTION NOTES WILL VOID THE WARRANTY
INSTALLATION INSTRUCTIONS 1. Locate a convenient place on the vehicle to mount the AUTO EJECT. A minimum clearance of 4" behind the mounting panel is required as well as 3 3/4" below the center line to clear the ejection mechanism. Place the template in position and center punch in 7 places. IMPORTANT THESE HOLES MUST BE DRILLED FIRST. Drill 4 mounting holes, 3/16" diameter and one, 2 1/4" clearance hole for the AUTO EJECT. Upon vehicle startup the Dynamic Disconnect opens the load circuit before ejecting the plug. By providing the time delays on both application and removal of power, no arcing can occur at the connector. power must be present at the shore line connector in order to operate the Dynamic Disconnect.
MODEL # 091-18CP
The Enclosure is fabricated from aluminum and contains a cutout and captive fasteners to mate with the Auto EJect mounting screws. Providing protection from road dirt and damage, this unit suggested for all Auto Eject installations in which the mechanism is exposed to the elements or subject to damage.
INSTALLATION RECORD & WARRANTY
Date Installed Installed By Vehicle Identification Vehicle Owner
WARRANTY
All product of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 1 years from the date the equipment was shipped. [. . . ] are warranted to be free of defects of material or workmanship. Liability is limited to repairing or replacing at our factory, without charge, any material or defects which become apparent in normal use within 1 years from the date the equipment was shipped. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KUSSMAUL 091-98-12
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KUSSMAUL 091-98-12 will begin.
