User manual KYOCERA DF-73

[. . . ] The sections of this Operation Guide and parts of this product marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the product. The symbols and their meanings are indicated below. DANGER: Indicates that serious injury or even death will very possibly result from insufficient attention to or incorrect compliance with the related points. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. [. . . ] It is therefore recommended that you consult with your service representative in regard to cleaning of internal parts. this is particularly effective if accomplished prior to seasons of high humidity. Consult with your service representative in regard to the cost of cleaning the internal parts of the product as well. Other precautions DO NOT place heavy objects on this product or cause other damage to the product. When lifting or moving the product, contact your service representative. Do not touch electrical parts, such as connectors or printed circuit boards. they could be damaged by static electricity. DO NOT attempt to perform any operations not explained in this Operation Guide. Names of parts (2) Ejection tray extension Pull this extension out when you want to copy or print onto 11" × 17", 8 1/2" × 14", B4 or A3 size paper. (3) Finisher release button Push this button when you want to separate the Document Finisher from the copier (or printer). (4) Reversing unit cover Open this cover if a paper jam occurs inside of the Document Finisher. (5) Top cover Open this cover if a paper jam occurs inside of the Document Finisher. (6) Stapler cover Open this cover when you want to replenish staples. (7) Staple holder The staple cartridge is installed here. Pull out this holder when you want to replenish staples. If finished copies or printouts come out curled or are stacked unevenly, turn the paper in the drawer[cassette] over and reload it. While the Document Finisher is turning the copy or printout over, that paper will be visible (as shown in (1) in the illustration). NEVER attempt to grab the paper at this point. This mode automatically sorts copies made from multiple originals into identical sets. This mode automatically groups copies made from multiple originals, with all the copies produced from an individual original grouped together in one set. This mode automatically sorts and then staples each copy set. This mode automatically shifts each set of printouts to the right and left in order to separate each individual set in a staggered fashion. [. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]