Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KYOCERA DP-410. We hope that this KYOCERA DP-410 user guide will be useful to you.
Lastmanuals help download the user guide KYOCERA DP-410.
Manual abstract: user guide KYOCERA DP-410INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Adhere label "Operation procedure" (C) of which the language corresponding to the destination of the MFP on to the existing label of the original feed unit cover. Clean the label surface of the original delivery table with alcohol. " (D) of which the language corresponding to the destination of the MFP on to the label of the original delivery table. [. . . ] " (E) of which the language corresponding to the destination of MFP on to the label of the original table. To check the machine operation, prepare original (a) where 4 lines (b) are drawn 20 mm from the edges of the A3 sheet and 1 line (c) is drawn at its center. Connect the power plug of the MFP into the wall outlet and turn the main power on. Set the original (a) on the DP and perform a test copy to check the operation and the copy example. Compare original (a) with the copy example. If the gap exceeds the reference value, perform the following adjustments according to the type of the gap. Be sure to adjust in the following order. If not, the adjustment cannot be performed correctly. for the adjustment of DP oblique position , see page 7. For the longer length copy example (g): Decreases the value. Repeat the steps 1 to 3 above until the gap of line (2) of copy example shows the reference value. <Reference value> Vertical gap of line (2): within ±1. Check the gap between line (1) on original (a) and line (2) of copy example. If the gap exceeds the reference value, adjust the gap according to the following procedure. <Reference value> Vertical gap of line (2): within ±2. For the faster leading edge timing, copy examples (h): Decreases the value. Repeat the steps 1 to 3 above until the gap of line (2) of copy example shows the reference value. <Reference value> Vertical gap of line (2): within ±2. [. . . ] Check the gap between center line (1) on original (a) and center line (2) of copy example. If the gap exceeds the reference value, adjust the gap according to the following procedure. <Reference value> Horizontal difference of center line (2) for the single copying: ±2 mm Horizontal difference of center line (2) for the duplex copying: ±3 mm Set the maintenance mode U072, and adjust the copy example for each of single and duplex copying respectively. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KYOCERA DP-410
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KYOCERA DP-410 will begin.
