User manual KYOCERA DP-710 INSTALLATION GUIDE FOR THE DOCUMENT PROCESSOR
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KYOCERA DP-710. We hope that this KYOCERA DP-710 user guide will be useful to you.
Lastmanuals help download the user guide KYOCERA DP-710.
Manual abstract: user guide KYOCERA DP-710INSTALLATION GUIDE FOR THE DOCUMENT PROCESSOR
Detailed instructions for use are in the User's Guide.
[. . . ] Close DP (A) and attach original mat (B) onto it with Velcro. Connect signal line (5) of DP (A) to the MFP and turn fixing knobs (6) at the both sides of the connecter clockwise to secure the line. [. . . ] <Reference value> Single copying: ±2 mm; Duplex copying: within ±3 mm When using the DP auto adjusting original, automatic adjustments excluding the DP oblique position adjustment can be performed. Check the horizontal gap between line (1) of original (a) and line (2) of copy example positions. If the gap exceeds the reference value, adjust the gap according to the following procedure. <Reference value> For single copying: The horizontal gap of line (2) should be within ±3 mm. For duplex copying: The horizontal gap of line (2) should be within ±4 mm. Turn screw (3) at the side of the right hinge and turn adjusting screw (4) at the rear side of the right hinge to adjust the DP position. For copy example (d): Turn the adjusting screw clockwise and move the DP to the inner side. For copy example (e): Turn the adjusting screw counterclockwise and move the DP to the front side. Repeat the steps above until the gap of line (2) of copy example shows the following reference values. <Reference value> For single copying: The horizontal gap of line (2) should be within ±3 mm. For duplex copying: The horizontal gap of line (2) should be within ±4 mm. After adjustment is completed, retighten screws (3) that have been loosened in step 1. Check the gap between line (1) of original (a) and line (2) of copy example. If the gap exceeds the reference value, adjust the gap according to the following procedure. [. . . ] If the center moves inner, copy sample (k): Decreases the value. Repeat the steps 1 to 3 above until the gap of line (2) of copy example shows the reference value. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KYOCERA DP-710
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KYOCERA DP-710 will begin.
