User manual KYOCERA FINECAM S5R

[. . . ] * MultiMedia Card est une marque déposée de Infineon Technologies AG (Allemagne), accordée sous licence à MMCA (MultiMediaCard Association). ENGLISH FRANÇAIS Annexe SET UP p s/m Technique de prise de vue Démarches de base Préparatifs d'appareil photo Introduction Introduction Introduction Thank you for purchasing this Kyocera product. The KYOCERA Finecam L4 and Finecam L3 are digital cameras equipped with a 3x optical zoom lens for high performance and high quality digital still photography. For the operation of the camera, please read this User's Manual carefully and follow its instructions to assure proper use. Check the Contents Make sure all the items below are included in the box. Digital camera "Finecam L4" or "Finecam L3" User's Guide (this book) Quick Start Guide USB cable (for the connection to PC) (page 31) Hand strap (page 13) Memory card (SD Memory Card) (page 14) Lithium battery pack (CR-V3) (page 14) CD-ROM (for the driver software) 2 Introduction Introduction How to Use this Manual The section "Introduction" contains important information regarding the camera and this User's Manual as well as precautions on handling the camera. The section "Preparation of Camera" contains instructions on what to do before using the camera. [. . . ] The functions above are supported only by the Epson PM-860PT printer. Note that the other Epson models and printers made by other manufacturers don't support the print functions above. (As of the end of February in 2003) Setting and Using the Printing Functions 1 To use the "DPOF Print", set the mode to print (DPOF) in the playback Basic Operations mode. (page 76) SETTING PRINT SE TU PRINT SEL IMAGE INDEX SET ALL RESET EXECUTE RETURN PRINT DISP. 2 Connect the camera and the printer with the supplied USB cable. EXT. I/F The direct print menu will be displayed on the LCD monitor. P DPOF INDEX SETS 3PCS OFF You can connect them when the powers of camera and the printer are ON. Printer port Camera port DIRECT PRT SINGLE PRINT DROF PRINT 39 Basic Operations 3 Select the direct print menu. Press Up or Down on the directional keypad to select the menu, and then press the execute button. To use [Single Print], select the image you want to print. Use the directional keypad to display the image you want to print. Select [EXECUTE] in the menu and press the execute button. SELECT PRINT IMAGE OK RETURN To use [DPOF PRINT], check the setting carried out at step 1. If the setting is correct, select "Execute" in the menu using the directional key pad and press the execute button. DROP PRINT Basic Operations PCS ON EXECUTE CANCEL 4 Set printing function. Press Up or Down on the directional keypad to select the menu, and then press Right on the directional keypad. Press Up or Down on the directional keypad to select the submenu and press the execute button. PRINT SETS EXECUTE PRT PRINT QTY DATE RETURN EXECUTE PRTER SETS NOT PRINT PRINT After the printing function is set, select [EXECUTE PRT] and press the execute button. You can now set the paper type, image layout, etc. 60 cm to 2 m 45 s/m Using the Camera "s" Mode and Movie "m" Mode Functions Types of Flash Modes Auto Flash Mode (default) The camera judges surrounding light conditions to determine whether or not a flash is necessary. Red-Eye Reduction / Auto Flash Mode When people's eyes appear red in images, it is called "red-eye" phenomenon. (See "What is red-eye phenomenon?" In this mode, the flash fires twice (once immediately before shooting and once at shooting) to help reduce the "red-eye". No image is shot on the first flash, but an image is shot on the second flash. (After the first flash, take care not to move the camera and that no one in the shot moves. ) Flash-off Mode In this mode, the flash is disabled regardless of surrounding light conditions. This mode is effective when shooting an evening sunset or to preserve indoor atmosphere. Since a slower shutter speed may be used in this mode depending on the lighting, avoid camera shake by stabilizing the camera with a tripod. a Fill-in Flash Mode In this mode, the flash fires regardless of surrounding light conditions. A portrait becomes darker when shooting with strong sunlight or with lighting coming from behind the people. In such cases, it is possible to take a clear shot of both subject and background. s/m Night Backdrop Mode When shooting people in front of a night backdrop, this mode allows both people and the night backdrop to be shot clearly by slowing the shutter speed and using a flash. Since shutter speed is slowed, avoid camera shake by stabilizing the camera with a tripod. Fill-Flash with Red-Eye Reduction Mode (When long exposure is selected) When the long exposure (page 63) is selected and Up on the directional keypad is pressed, you can use the fill-flash with red-eye reduction mode. This mode is appropriate for shooting people in front of the night backdrop. [. . . ] In the event that an AC adapter plug emits smoke or unusual smell or sound, or if it is damaged by impact or falling, cease use immediately. Continuing to use a damaged plug could result in fire danger. In the event of damage to a plug, consult your dealer or Kyocera/Yashica Service Center. Do not connect the AC adapter to any sources of power other than a household AC outlet (AC 100V to 240 V; 50/60Hz). [. . . ]