User manual KYOCERA FS-1800 PLUS INSTALLATION

[. . . ] Cover. fm Page 1 Thursday, August 9, 2001 3:37 PM Installation Guide IFS18+EE. book Page 1 Thursday, August 9, 2001 3:38 PM Caution NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION. Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the HP PCL 6. The emulation mode can be changed by following the procedures described in the Operation Guide contained as an electronic file in the Kyocera Mita Digital Library CD-ROM supplied with the printer. Notice The information in this manual is subject to change without notification. Additional pages may be inserted in future editions. [. . . ] C- If the product has been exposed to rain or water. D- If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E- If the product has been dropped or the cabinet has been damaged. ISO 7779 Maschinenlärminformationsverordnung 3. GSGV, 18. 01. 1991: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß ISO 7779. CE Marking Directive According to Council Directive 89/336/EEC and 73/23/EEC Manufacturer's name: Kyocera Corporation, Mie Plant Tamaki Block. Manufacturer's address: 704-19 Nojino, Tamaki-Cho, Watarai-Gun, Mie-Ken 519-0497, Japan declares that the product Product name: Page Printer Model number: FS-1800+ (as tested with the enhancement optional unit: PF-60, DU-60, and SO-60) Conforms to the following product specifications. EN 55 022:1998 Class B EN 61 000-3-2:1995 EN 61 000-3-3:1995 EN 55 024:1998 EN 60 950:1992 (+A1+A2+A3+A4+A11) EN 60 825-1:1994+A11 The manufacturer and its merchandising companies retain the following technical documentation in anticipation of the inspection that may be conducted by the authorities concerned. User's instruction that conforms to the applicable specifications Technical drawings Descriptions of the procedures that guarantee the conformity Other technical information 22 IFS18+EE. book Page 23 Thursday, August 9, 2001 3:38 PM Declaration of Conformity (Australia) Manufacturer's name: Manufacturer's address: declares that the product Product name: Page Printer Model number: FS-1800+ (as tested with the enhancement optional units: PF-60, DU-60, and SO-60) Description of device: This Page Printer Model FS-1800+ is the 18 ppm; A4 size and utilized plane paper; laser; dry toner etc. The printer can be equipped with several enhancement optional units as a paper feeder as PF-60, a duplexer as DU-60, a sorter as SO-60 etc. Conforms to the following product specifications. AS/NZS 3548: 1995 (EN 55 022:1994 Class B) IEC60950 (EN 60 950:1992+A1+A2+A3+A4+A11) IEC60825-1 (EN 60 825-1:1994+A11) The manufacturer and its merchandising companies retain the following technical documentation in anticipation of the inspection that may be conducted by the authorities concerned. User's instruction that conforms to the applicable specifications Technical drawings Descriptions of the procedures that guarantee the conformity Other technical information Kyocera Mita Australia Pty. , Ltd. 6-10 Talavera Road, North Ryde, NSW, 2113, Australia Phone: +61 2-9888-9999 Fax: +61 2-9888-9588 Kyocera Corporation, Printer Division 2-14-9 Tamagawadai, Setagaya Ward, Tokyo 158-8610, Japan Disclaimer We shall have no liability or responsibility to customers or any other person or entity with respect to any liability, loss or damage caused or alleged to be caused directly or indirectly by equipment sold or furnished by us, including but not limited to, any interruption of service, loss of business or anticipatory profits, or consequential damages resulting from the use or operation of the equipment or software. 23 IFS18+EE. book Page 24 Thursday, August 9, 2001 3:38 PM Prolonged Non-Use and Moving the Printer !Prolonged Non-use If you ever leave the printer unused for a long period of time, remove the power cord from the wall outlet. We recommend you consult with your dealer about the additional actions you should take to avoid possible damages that may occur when the printer is used next time. !Moving the Printer When you move the printer: · Move it gently. · Keep it as level as possible, to avoid spilling toner inside the printer as shown in the figure. · The handhold on the right side of the printer doubles as the memory card slot. Be sure to remove the memory card first, if inserted, before lifting or moving the printer. · Be sure to remove all the option units such as the sorter and duplexer before moving the printer. If you need to move the printer to another location, remove the toner container, waste toner bottle, and developer unit. The procedure for removing these is as follows: 1 Remove the toner container and waste toner bottle from the printer. [. . . ] AVOID DIRECT EXPOSURE TO BEAM. CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 28 IFS18+EE. book Page 29 Thursday, August 9, 2001 3:38 PM Operator Panel For more details on operating procedures, see the Operation Guide contained as a PDF file in the CD-ROM supplied with the printer. READY DATA GO ? ATTENTION INTERFACE SIZE TYPE CANCEL MENU ENTER Operator Panel Indicator Name Ready indicator Data indicator Attention indicator Description Flashing: Indicates when an error occurs that you can clear by yourself. Lit: Indicates that the printer is on-line. Off: Indicates that the printer is off-line. Data can be received but will not be printed. [. . . ]