User manual KYOCERA FS-3040MFP

[. . . ] OPERATION GUIDE FS-3040MFP/FS-3140MFP FS-1100 FS-1300D Introduction Thank you for your purchase of FS-3040MFP/FS-3140MFP. This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and take a simple troubleshooting action as necessary, so that you can always use the machine in good condition. Please read this Operation Guide before you start using the machine, and keep it close to the machine for easy reference. We recommend the use of our own brand supplies. [. . . ] Density appears. 7 8 Press the or key to select [Auto] or [Manual]. Press the OK key. is displayed and the screen returns to the Function Default menu. 8-45 Default Setting (System Menu) Zoom Select the enlarged/reduced default when paper size/sending size changed after the originals set. The available default settings are shown below. Item 100% Auto Description Copy (send/save) at actual size (100%). Automatically reduce or enlarge the originals to match paper size/ sending size. Use the procedure below to select the default zoom setting. Sys. Menu/Count. : a b 3 System 4 User/Job Account 5 Common Settings ********************* [ Exit ] 1 In the Sys. menu, press the select [Common Settings]. or key to Common Settings: a b 1 Language ********************* 2 Default Screen 3 Sound [ Exit ] 2 Press the OK key. The Common Settings menu appears. 3 Function Default: a b 1 Color Selection ********************* 2 Scan Resolution 3 FAX Resolution [ Exit ] Press the or key to select [Function Default]. 4 Press the OK key. The Function Default menu appears. 5 Zoom: ab 1 *100% ********************* 2 Auto Press the or key to select [Zoom]. 6 Press the OK key. Zoom appears. 7 8 Press the or key to select [100%] or [Auto]. Press the OK key. is displayed and the screen returns to the Function Default menu. 8-46 Default Setting (System Menu) Collate Set the defaults for Collate. The table below shows the available settings. Item Collate Off On Description Collate not performed. Collate performed. NOTE: Refer to page 3-15 for Collate/Offset. Use the procedure below to set the default Collate/Offset settings. Sys. Menu/Count. : a b 3 System 4 User/Job Account 5 Common Settings ********************* [ Exit ] 1 In the Sys. menu, press the select [Common Settings]. or key to Common Settings: a b 1 Language ********************* 2 Default Screen 3 Sound [ Exit ] 2 Press the OK key. The Common Settings menu appears. 8 3 Function Default: a b 1 Color Selection ********************* 2 Scan Resolution 3 FAX Resolution [ Exit ] Press the or key to select [Function Default]. 4 Press the OK key. The Function Default menu appears. 5 Collate: ab 1 Off 2 *On ********************* Press the or key to select [Collate]. 6 Press the OK key. Collate appears. 7 8 Press the or key to select [Off] or [On]. Press the OK key. is displayed and the screen returns to the Function Default menu. 8-47 Default Setting (System Menu) Orig. Orientation Set the original orientation defaults. The available default settings are shown below. Item c Top Edge Top d Top Edge Left Refer to page 4-6 for Original Orientation. [. . . ] Printer Driver The software to enable you to print data created on any application software. The printer driver for the machine is contained in the CD-ROM enclosed in the package. Install the printer driver on the computer connected to the machine. Send as E-mail A function to send the image data stored in the machine as an E-mail attachment. [. . . ]