User manual KYOCERA FS-C8026N

[. . . ] FS-C8026N Color Page Printer Operation Guide Safety Notes Please read the Operation Guide before using the printer. Keep it close to the printer for easy reference. The sections of this guide and parts of the printer marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the printer. The symbols and their meanings are indicated below. [. . . ] In this menu, you can also set the type and pitch for Courier and Letter Gothic; as well as to print a font list. 6 7 8 Press the or key repeatedly until the desired font number appears. For font numbers of the internal fonts, see Printing lists of fonts on page 3-36. When the desired font is displayed, press the ENTER key. The display returns to Ready. 1 2 Press the MENU key. or key repeatedly until Font > Font > 3-34 3. 6 Making Default Settings Selecting regular or dark Courier/Letter Gothic Courier or Letter Gothic font thickness can be selected as Regular or Dark. In the procedure below, it is assumed that Courier is selected. The procedure is the same for Letter Gothic. Changing the default font size You can change the size of the default font. If you selected a proportional font, the character size can also be changed. 1 2 Press the MENU key. or key repeatedly until Font > 1 2 Press the MENU key. or key repeatedly until Font > Font > > Font 3 3 Press the key. Press the Select > appears. or key until >Font >Font Select Internal > >Font Select Internal > 4 4 5 Make sure that Internal is displayed and press the key. Press the or key repeatedly until >>Courier appears. If you are selecting the thickness of the Letter Gothic font, choose >> Letter Gothic here instead. Make sure that Internal is displayed and press the key. or key repeatedly until >>Size 5 >>Size 012. 00 point(s) >>Courier Regular 6 Press the ENTER key. A blinking cursor (_) appears. 6 Press the ENTER key. A blinking question mark (?) appears. >>Size 012. 00 point(s) >>Courier ?Regular 7 7 8 9 Press the or key to increase or decrease the value at the blinking cursor. The font size can be set between 4 and 999. 75 points, in 0. 25-point increments. Use the or key to move the cursor right and left. When the desired size is displayed, press the ENTER key. The display returns to Ready. Select Regular or Dark using the Press the ENTER key. or key. 8 9 Press the MENU key. The display returns to Ready. 3-35 3. 6 Making Default Settings Character pitch for Courier/Letter Gothic You can set the character pitch for fixed fonts when the default font is Courier or Letter Gothic. Setting the character code set You can change the character code set. [. . . ] The CA-31 is the regular casters that may be used for the standalone FS-C8008 series printers, including only the standard PF-30A paper feeder or PD-800 duplex unit. The CA-31B is the topple-resistant, heavy-duty caster kit. The CA-31B must be installed when the printer is installed with one or more extra paper feeders. The manufacturer is not liable for any damages or injuries that may be caused when the CA-31B is not used to support the printer having more than one paper feeders. If the floor is delicate against casters, when this product is moved after installation, the floor material may be damaged. Caution HDD Slot Note Figure A-15 Figure A-14 A-7 A. 3 General Description of Options A. 3. 8 IB-20/IB-21E/IB-22 Network Interface Cards Along with the standard for the network interface on the printer, the network interface card supports TCP/IP, IPX/ SPX, NetBEUI and EtherTalk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetWare, etc. [. . . ]