User manual KYOCERA FS-C8500DN USER MANUAL

[. . . ] Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems arising from the use of this product, regardless of the information herein. Regarding Trademarks Microsoft Windows is a registered trademark of Microsoft Corporation in the U. S. KPDL is a trademark of Kyocera Corporation. [. . . ] Poster appearance is improved when the edges overlap slightly. Select the check box, then type or select a value between 0. 00 and 1. 20 inches (0. 0 and 30. 4 mm). This option reduces the final poster size slightly. Print crop marks This selection prints a border at the edges of each poster sheet. You can crop each sheet on the border before assembling the sheets. This option ensures that data on adjoining sheets matches precisely. Print assembly marks This selection prints numbers at the edges of each sheet, matching numbers on adjoining sheets. Assemble each sheet edge to the same numbered edge on another sheet. Use Print format to print a proof sheet, along with the poster, to guide you in assembling the printed poster sheets. Poster pages This selection prints all of the sheets to be assembled as a poster. Proof sheet This selection prints all the poster pages on one sheet with markings that display the sheet assembly. Poster pages and proof sheet This selection prints all poster sheets and a one-page proof sheet. Printing a Poster To print a poster or banner, follow these steps: 1 2 3 4 5 6 Scaling In the Layout tab, select Poster. In Sheets per page, select the poster size. Each option describes the number of sheets it takes to represent one finished poster page. Click Poster Settings to select options in any combination. These options ensure a precise assembly of the pages to create the poster. In Print format, select one of the options for a finished print format. Click OK to return to the Print dialog box. Click OK to begin printing. Scaling increases or decreases text and graphics on a page. You can also select a gutter setting in the Finishing tab that enlarges the margins to accommodate an easier assembly of pages into a booklet. Scaling is not available when Booklet, Poster or Multiple pages per sheet is selected. Setting Scaling on the Page To set scaling values, follow these steps. KX DRIVER 5-3 Layout 1 2 In the Layout tab, select Scaling. Type or select a percentage between 20 to 500. [. . . ] SNMP settings determine the level of security when using the Auto Configure feature, and prevent unauthorized printing to the SNMPv3 printing device. SNMP settings must be set in the Administrator settings in the Device Settings tab, and in the printing system's Command Center. Status monitor Optional feature that displays printing system status messages in the lower right corner of the window during printing. You can customize the appearance of the status monitor, and determine what messages are displayed and how by selecting preferences and notifications. T Transparency A clear plastic, page-sized sheet used as a printing medium. Transparency interleaving Publishing feature that inserts a backing sheet between printed transparencies. The backing sheet, also known as an interleaf, helps keep transparencies clean and prevents them from clinging together. W Watermark The Watermark feature is available in the Advanced tab. [. . . ]