User manual KYOCERA KM-1505

[. . . ] INSTRUCTION HANDBOOK Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference. As an ENERGY STAR Partner, KYOCERA MITA CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment. registered mark. All rights reserved. [. . . ] Then, hold the container horizontally and shake it from side to side 10 times. WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. 5 Gently pull the cleaning shaft out as far as it will go and push it back in 2 to 3 times. 7 Install the toner container. * First insert the toner container into the copier as far as it will go and then slide it to the right as indicated by the marked arrows. IMPORTANT Do not pull the cleaning shaft with force or pull it out completely. 3-7 CHAPTER 3 PREPARATIONS BEFORE USE 8 Install the waste toner tank. NOTE If the waste toner tank is not installed correctly, the front cover will not close. 9 NOTE Close the front cover. Toner replenishment requires 2 to 3 minutes. If the Add Toner indicator does not turn off 2 to 3 minutes after the start of toner replenishment, repeat step 6. 3-8 CHAPTER 4 BASIC OPERATIONS 1. Basic copying procedure 1 4-1 (English text panel) (Symbol panel) 1. When warm-up ends, the Start indicator lights. * If you set an original and press the Start key before warm-up ends, copying automatically starts at the end of warm-up. 2 (English text panel) (Symbol panel) 4. Copy quality selection Copy quality can be selected according to the original type. Press the image mode selection key to light the respective indicators. indicator Text and photo originals: Text & Photo indicator Photo originals: Photo indicator Text originals: Text indicator * The copy exposure can be adjusted in all image modes (see "Auto exposure adjustment", "Text and photo original exposure adjustment", "Text original exposure adjustment" and "Photo original exposure adjustment" on pages 5-1 and 5-2). * The image mode used in the initial mode can be selected (see "Image mode" on page 5-1). 4-2 2. Function selection Set copy functions as desired. (English text panel) (Symbol panel) 3 (English text panel) (Symbol panel) When the Auto Exp. , Text & Photo, Photo and Text indicators are all turned off, the copier is in the economy mode. In the economy mode, the image density becomes lighter to reduce toner consumption. Use this mode when high quality printing is not required. 3. Paper size selection Select the paper source that contains the paper to be used from the drawer and multi-bypass using the Paper Select key. 4-1 CHAPTER 4 BASIC OPERATIONS 5 (English text panel) (Symbol panel) 8 (English text panel) (Symbol panel) 5. Copy exposure adjustment Copy exposure can be selected for all the image modes excluding the auto exposure mode. To make the copy density darker, press the right copy exposure adjustment key to move the indication on the exposure scale to the right; to make the copy density lighter, press the left copy exposure adjustment key to move the indication on the exposure scale to the left. * The number of exposure adjustment levels can be selected from 3 and 5 (see "Exposure steps" on page 5-1). 8. Copying is possible when the indicator is lit green. 6 (English text panel) (Symbol panel) 9 6. Setting the number of copies Pressing the Number of Copies/Zoom (+) key increases the number of copies and pressing the Number of Copies/Zoom (-) key decreases the number of copies. If you hold down the Number of Copies/Zoom (+) key for approximately 2 seconds when the number of copies is "1", the number jumps to "99"; if you hold down the Number of Copies/ Zoom (-) key for approximately 2 seconds when the number of copies is "99", the number jumps down to "1". Display the desired number of copies on the copy quantity display. [. . . ] Developing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fixing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Photoconductor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]