User manual KYOCERA KM-2530

[. . . ] Operation Guide * The above illustration includes the optional original cover. Please read the operation guide before using the copier. Keep it close to the copier for easy reference. G Off Mode The device automatically enters "Off Mode" when 60 minutes have passed since the device was last used. The amount of time of no activity that must pass before "Off Mode" is activated may be lengthened. [. . . ] Inch specifications 1 Touch the [Combine] key (for example) at the right-hand side of the Function screen. Inch specifications Metric specifications Metric specifications 3 The "Combine" screen will appear. Inch specifications Touch the [Delete] key. The "Delete registration" screen will appear. Inch specifications Metric specifications Metric specifications 5-41 CHAPTER 5 FUNCTIONS 4 Touch the [Combine] key. Inch specifications Metric specifications 5 Confirm the key name, and then touch the [Yes] key. Control returns to the "Combine" screen. Inch specifications Metric specifications 5-42 CHAPTER 6 COPIER MANAGEMENT 1. Copy management mode The total number of copies made by each department can be managed using up to 8-digit codes for up to 500 departments. Limits for the number of copies can be set on a department-by-department basis. (1) Copy management mode Inch specifications 5 1 2 8 4 3 6 7 Metric specifications 5 1 2 8 4 3 6 7 6-1 CHAPTER 6 COPIER MANAGEMENT Copy management mode 1 Copy management mode content Page 6-3 Registering/deleting new ID codes "Registering new ID codes" Assigns an up to 8-digit ID codes and a maximum number of copies to the departments in your organization. Limits are set in units of 1, 000 sheets, up to a maximum of 999, 000. Entering "0" enables unlimited copying. When a department reaches its limit, the copier will not make any more copies. "Deleting new ID codes" Deletes registered ID codes. Altering limits Alters limits for the copies of respective departments without deleting or re-registering the ID codes. Clears all the copy counts for the various departments after a suitable period of time. Copy counts cannot be cleared individually. 6-5 2 6-6 3 Clearing copy counts 6-7 4 Viewing copy counts by each de- Follow this procedure to view copy totals. It is possible to view the partment number of copies made on the machine by each department. Printing a copy management list Follow this procedure to print out the number of copies made in each department in report form. 6-8 5 6-8 6 Turning copy management ON/ Turn ON copy management to apply the management settings that OFF you registered. When not using the management settings, turn it OFF to disable the management settings. Turning printer management ON/ Turn ON printer management to apply the management settings that OFF (optional) you registered. When not using the management settings, turn it OFF to disable the management settings. [. . . ] Les interrupteurs sur l'appareil ne sont que des interrupteurs de fonctionnement : ils ne mettent pas l'appareil hors tension. WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [. . . ]