User manual KYOCERA KM-5230

[. . . ] Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference. Has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Specific matters for 52 ppm copier are covered on page 201 and thereafter. [. . . ] Q Copying desired page on the front side [Chapterize] The first page of each chapter can be copied onto the front side by setting the originals to be read by chapter. Select the function by touching the "Print as originals" key, "Duplex All Originals" key or "Chapterize 1/2 Sided Org. When setting the custom paper size or the custom zoom ratio, touch the manual key until "1:1" is displayed on the zoom ratio display. * When changing the zoom ratio, touch the "+" key or "-" key on the right side of the zoom ratio display. When setting the zoom mode, such as standard zoom or XY zoom, touch the "Zoom" key and follow the instruction on page 48 and after. * The setting of the zoom mode can be changed by each job. * When setting the border erase mode, touch the "+" key or "-" key on the right side of the display of the width of erasing border to set the width of erasing border. The width can be selected from 1/4", 1/2" and 3/4". * The border erase mode in this setting is effective only for the sheet originals. * The setting of the border erase mode can be changed by each job. * If the "Added" key is touched, the following copy functions can be set. Margin mode: Touch the "Margin" key and follow step 4 and after on page 58. Merge copy: Touch the "Combine" key and follow step 3 and after on page 84. Page number printing: Touch the "Page #" key and follow step 4 and after on page 61. * The originals can be set within the one job is limited to the originals selected in step 4, and the one type of originals. If the type of original is changed, it must be stored in memory in another job. Continue reading originals by touching the "Continue" key to repeat key operation from step 4. * When all originals has been read completely, go to step 9. * Touch the "Clear Last Job" key to clear the last page of read originals. * Print the test print by touching the "Test print" key. When the test print is completed, the display will return to the screen in step 8. * Touch the "Sort" key to change the sorter mode (sort copying or group copying). [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]