User manual KYOCERA PF-400

[. . . ] The power supply cord is used as the main disconnect device. Ensure that he socket/outlet is located/installed near the equipment and is easily accessible. DANGER: Indicates that serious injury or even death will very possibly result from insufficient attention to or incorrect compliance with the related points. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. [. . . ] DO NOT attempt to perform any operations not explained in this handbook. Avoid locatios near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire. Veuillez contacter votre technicien de maintenance pour demander le remplacement de la notice si les avertissements en matière de sécurité sont illisibles ou si la notice elle-même est manquante (participation demandée). Before you start using this product, read this operation guide carefully to understand how to install and operate it correctly. You can load approximately 250 sheets of paper (paper thlckness: 0. 11 mm/sheet) into the paper feed cassette of the paper feeder. You can stack up to four paper feeders so that you will be able to increase the number of paper or set different kinds of paper at a time. Furthermore, by changing the settings of the printer driver and the printer's operator panel, you can select the paper feeder automatically to print on different sizes or kinds of paper. Before installing (or removing) the paper feeder, be sure to turn off the printer's power and disconnect the power cord plug from the AC outlet. If installed improperly, the printer placed on top of the feeder may slide and fall off which could result in injury. 1 Remove the paper feeder from the container Box and place the feeder where you want to install it. If you want to set two or more paper feeders, pile them up as shown in the figure. 2 Lift the printer up without tilting it, then put it down onto the paper feeder(s) by fitting the four corners as shown in the figure. Now, you have finished to install the paper feeder to the printer. To set paper size and load paper, follow the next procedures. , You can load approximately 250 sheets of paper into the PF-400 s paper feed cassette. The available paper sizes are shown in the figure, ranging from A5 to A3 148 210 mm to 297 432 mm. The paper feed cassette is factory-set for loading A4R this setting: paper. [. . . ] Check the printer's message display, then pull out the paper feeder and remove the jammed paper. Pull out the paper feed cassette in the displayed order and remove the jammed paper. After removing all paper, put the cassette back . the printer automatically start printing again. [. . . ]