Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KYOCERA PH-4C. We hope that this KYOCERA PH-4C user guide will be useful to you.
Lastmanuals help download the user guide KYOCERA PH-4C.
Detailed instructions for use are in the User's Guide.
[. . . ] Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference. ALWAYS read this Operation Guide thoroughly before use. After reading, keep it together with the Operation Guide for your copier. [. . . ] Use this mode when sorting or grouping are not required. ALWAYS use Non-Sort Mode when copying onto transparencies or other special material or paper. In this mode, copies are stapled in two positions in the center of the paper. The following paper sizes can be used in Booklet Stitching mode: · The Booklet Copy function on your copier can be used to automatically produce booklets ready for stitching and folding. Refer to the Operation Guide for your copier for more information. Refer to the Operation Guide for your copier for more detailed information. The maximum number of sheets that can be stitched at one time is 16. Up to 64 originals can be used in this mode. If using the Platen, a message displays after each original is scanned to determine whether another original requires scanning or if copying can commence. NOTE: Refer to the Operation Guide for your copier for further details. Remove all copies from the storage cover to continue. The following paper sizes can be used: · Hole Punch mode can be used with Sort: ON, Staple and Sort: OFF modes. Paper weights must be between 45 g/m2 and 200 g/m2. NOTE: B5R can only be selected if copies are ejected onto Tray A. NOTE: Refer to the Operation Guide for your copier for more detailed information. The copies are automatically hole punched and ejected onto Tray B. NOTE: Holes are punched in each Copy individually, therefore the location of the holes may vary on each sheet. If Tray A is not engaged when Tray B becomes full, an error message displays. When using Interrupt Mode, the copies for the interrupt job are usually ejected onto the finisher tray not currently in use. If required, a different tray can be selected on the copier Operation Panel. NOTE: Refer to the Operation Guide for your copier for further details. Print or Copy output can be ejected into a specified Multi-Job Tray. [. . . ] Turn the conveyor knob (G1) to feed the paper further along to enable easy removal. If the jammed paper cannot be easily removed, proceed to the next step. If the illustration shown displays on the operation panel of your copier, there is a paper jam in the conveyor section to Tray A. If the jammed paper is visible in the eject slot, pull it out in the direction of ejection without tearing it. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KYOCERA PH-4C
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KYOCERA PH-4C will begin.
