User manual KYOCERA TASKALFA 820

[. . . ] TASKalfa 620/820 OPERATION GUIDE Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference. This Operation Guide is for models TASKalfa620 and TASKalfa820. In this guide, TASKalfa620 refers to the 62 cpm (copies per minute) model and TASKalfa820 to the 82 cpm model. NOTE: This Operation Guide contains information that corresponds to using both the inch and metric versions of these copiers. [. . . ] In this mode, paper that matches the size of the originals will be selected automatically. To change the paper size, press the desired paper size to select the paper source. NOTE: For details on selecting paper manually, refer to Chapter 3 of the Advanced Operation Guide. Ready to copy. A4 Plain A4 Recycled A3 Plain A4 Plain Basic APS MP tray Plain A4 Plain User choice Auto % 100% Zoom Function Auto Density Density Program Paper Size A 100% Off Staple Left Top Staple /Punch 4 Use the numeric keys to enter the copy quantity. NOTE: It is possible to restrict the maximum copy quantity. Refer to Chapter 3 of the Advanced Operation Guide. 5 Press the Start key to start copy. 3-2 Basic Operation NOTE: You can adjust the angle of the operation panel as shown by releasing the operation panel lock lever. When adjusting the angle of the operation panel, do not place your hands or fingers underneath the operation panel. This can result in injury. 6 Remove the finished copies from the output tray. The output tray can hold up to 250 sheets of standard paper (80 g/m²). However, the capacity will vary depending on the type and condition of the paper. Caution If the copier will not be used for a short period of time (overnight, etc. ), turn the main power switch off ( position). If it will not be used for an extended period of time (vacations, etc. ), remove the power plug from the outlet for safety purposes. When turning off the main power switch, press the Power key on the operation panel to off ( ). Make sure that the Power lamp is off before turning off the main power switch. Turning off the main power switch before pressing the Power key to off may cause damage to the equipped hard disk. 3-3 Basic Operation Selecting Image Quality Choose the image quality suited to the type of original. Image Quality Mode Text+Photo Photo Text Description For originals with both text and photographs. For originals primarily consisting of photographs. For originals primarily consisting of text. 1 2 Place the originals in the document processor or on the platen. Press [Function]. Ready to copy. A4 Plain A4 Recycled A3 Plain A4 Plain Basic APS MP tray Plain A4 Plain User choice Auto % 100% Zoom Function Auto Density Density Program Off Staple Left Top Staple /Punch Paper Size A 100% 3 Press [Original Image]. Ready to copy. Paper Selection Density Original Image Collate/ Offset Basic Duplex Zoom Margin/ Centering Border Erase User choice Original Size Mixed Size Originals Page numbering Cover Function Combine Continuous Scan Form Overlay Booklet Program Paper Size A 100% Up Down 4 Select the image quality. Ready to copy. Original Image Register Paper Size A 100% Back Text+Photo Photo Text Text+Photo:Set this mode to original mixed (text & ph Photo:Add a dimensional effe Text :Copy pencil & fine line c 5 Press the Start key to start copying. NOTE: You can also adjust the density for each Image Quality mode. Refer to Chapter 3 of the Advanced Operation Guide. 3-4 Basic Operation Adjusting Density Adjust the density automatically or manually. [Manual] is selected as the default setting mode. When selecting [Manual], follow the steps as below. 1 2 Place the originals in the document processor or on the platen. Press the density adjustment key ( / ) to adjust the density level. To use the auto density mode, press [Auto Density]. [. . . ] Open the cover A5. 11 Remove the jammed paper. If the paper tears, remove any loose scraps from the copier. 12 Push A6 and close the cover A5 securely. 13 Open the cover A7 and remove the jammed paper. If the paper tears, remove any loose scraps from the copier. 14 15 Close the cover A7. Open the cover A8 and remove the jammed paper. [. . . ]